Main Page
(Difference between revisions)
(add CAN config) |
|||
| Line 1: | Line 1: | ||
| − | + | {{TOC right}} | |
| + | =PIC18LF26K83= | ||
| + | ==Configuration== | ||
| + | Clock is set to the highest value (64MHz) as the board is made for test purposes. It could be lowered if a such speed is not needed for the final use. Typically in order to reduce power consumption | ||
| + | ===CAN=== | ||
| + | As described in the ADCS control document, the CAN configuration is the following : | ||
| + | version 2.0 B, extended ID, SP set to 87.5% and SJW = 1, bus speed 125 kbps. | ||
| − | + | {|class=wikitable | |
| + | |- | ||
| + | ! Register || Hex || Parameter || Description | ||
| + | |- | ||
| + | |rowspan="2"| BRGCON1 | ||
| + | |rowspan="2"| 0x0F | ||
| + | | BRP || (2x16)/FOSC | ||
| + | |- | ||
| + | | SJW || 1 x TQ | ||
| + | |- | ||
| + | |rowspan="4"| BRGCON2 | ||
| + | |rowspan="4"| 0xBC | ||
| + | | PRSEG || 5 x TQ | ||
| + | |- | ||
| + | | SAM || once at sample point | ||
| + | |- | ||
| + | | SEG1PH || 8 x TQ | ||
| + | |- | ||
| + | | SEG2PHTS || Freely programmable | ||
| + | |- | ||
| + | |rowspan="3"| BRGCON3 | ||
| + | |rowspan="3"| 0x01 | ||
| + | | SEG2PH || 2 x TQ | ||
| + | |- | ||
| + | | WAKDIS || Enable CAN wake-up | ||
| + | |- | ||
| + | | WAKFIL || CAN line filter not used | ||
| + | |- | ||
| + | |} | ||
| + | |||
| + | ===UART=== | ||
| + | |||
| + | ===SPI=== | ||
| + | |||
| + | ===ADC=== | ||
== Getting started == | == Getting started == | ||
| + | Consult the [//meta.wikimedia.org/wiki/Help:Contents User's Guide] for information on using the wiki software. | ||
* [//www.mediawiki.org/wiki/Manual:Configuration_settings Configuration settings list] | * [//www.mediawiki.org/wiki/Manual:Configuration_settings Configuration settings list] | ||
* [//www.mediawiki.org/wiki/Manual:FAQ MediaWiki FAQ] | * [//www.mediawiki.org/wiki/Manual:FAQ MediaWiki FAQ] | ||
* [https://lists.wikimedia.org/mailman/listinfo/mediawiki-announce MediaWiki release mailing list] | * [https://lists.wikimedia.org/mailman/listinfo/mediawiki-announce MediaWiki release mailing list] | ||
Revision as of 17:16, 20 July 2020
Contents |
PIC18LF26K83
Configuration
Clock is set to the highest value (64MHz) as the board is made for test purposes. It could be lowered if a such speed is not needed for the final use. Typically in order to reduce power consumption
CAN
As described in the ADCS control document, the CAN configuration is the following : version 2.0 B, extended ID, SP set to 87.5% and SJW = 1, bus speed 125 kbps.
| Register | Hex | Parameter | Description |
|---|---|---|---|
| BRGCON1 | 0x0F | BRP | (2x16)/FOSC |
| SJW | 1 x TQ | ||
| BRGCON2 | 0xBC | PRSEG | 5 x TQ |
| SAM | once at sample point | ||
| SEG1PH | 8 x TQ | ||
| SEG2PHTS | Freely programmable | ||
| BRGCON3 | 0x01 | SEG2PH | 2 x TQ |
| WAKDIS | Enable CAN wake-up | ||
| WAKFIL | CAN line filter not used |
UART
SPI
ADC
Getting started
Consult the User's Guide for information on using the wiki software.
