Kart/sensors/HCSR04
(Difference between revisions)
(→Kart connection) |
(→Ultrasound ranger) |
||
Line 7: | Line 7: | ||
It has a dedicated [[Kart/sensor board#Ultrasound ranger|connector]] on the [[Kart/sensor board|I/O board]]. | It has a dedicated [[Kart/sensor board#Ultrasound ranger|connector]] on the [[Kart/sensor board|I/O board]]. | ||
+ | |||
+ | The <code>ultrasoundRanger</code> block in the <code>sensors</code> FPGA counts the ultrasonic pulse length in terms of the 10 MHz clock periods. | ||
+ | The distance is thus given by: | ||
+ | |||
+ | :: <math>distance = \frac{580}{count} ~ [cm]</math> | ||
[[Category:Kart]] | [[Category:Kart]] |
Revision as of 13:25, 21 August 2014
|
Ultrasound ranger
The elecfreaks Ultrasonic sensor distance measuring module receives a trigger pulse, sends an ultrasonic pulse train and the provides a pulse whose length is proportional to the sound flight and echo time.
It has a dedicated connector on the I/O board.
The ultrasoundRanger
block in the sensors
FPGA counts the ultrasonic pulse length in terms of the 10 MHz clock periods.
The distance is thus given by: