HiRel/CanSat/Master FPGA

(Difference between revisions)
Jump to: navigation, search
(Connections)
Line 12: Line 12:
 
The FPGA board connectors consist of 4 dual [http://en.wikipedia.org/wiki/Pmod_Interface Pmods], each having 12 pins.
 
The FPGA board connectors consist of 4 dual [http://en.wikipedia.org/wiki/Pmod_Interface Pmods], each having 12 pins.
 
The Pmods are connected to the slave boards via the bottom and the top ring.
 
The Pmods are connected to the slave boards via the bottom and the top ring.
 +
 +
{|class=wikitable
 +
|-
 +
! board || Function || Pmod pin || FPGA pin
 +
|-
 +
<!-- Power board, S2 bottom -->
 +
| rowspan=4 | power|| USB_TxD || J1.1 || 127
 +
|-
 +
| USB_RxD || J1.3 || 124
 +
|-
 +
| LED0 || J1.5 || 121
 +
|-
 +
| LED1 || J1.7 || 118
 +
|-
 +
<!-- Power board, S2 top -->
 +
| rowspan=4 | power|| switch_0 || J3.2 || 133
 +
|-
 +
| switch_1 || J3.4 || 137
 +
|-
 +
| switch_2 || J3.6 || 139
 +
|-
 +
| switch_3 || J3.8 || 141
 +
|-
 +
|}
  
 
= FPGA comparisons =
 
= FPGA comparisons =

Revision as of 13:28, 12 January 2015

Contents

This board will be the master board on the HiRel/CanSat.

System

The design contains a soft-core processor controlling the different slaves of the HiRel/CanSat via peripheral devices attached to it by an AHB-lite bus system.

Connections

The FPGA board connectors consist of 4 dual Pmods, each having 12 pins. The Pmods are connected to the slave boards via the bottom and the top ring.

board Function Pmod pin FPGA pin
power USB_TxD J1.1 127
USB_RxD J1.3 124
LED0 J1.5 121
LED1 J1.7 118
power switch_0 J3.2 133
switch_1 J3.4 137
switch_2 J3.6 139
switch_3 J3.8 141

FPGA comparisons

The choice of the FPGA was based on a comparison of synthesis results of a simple AHB-Lite system.

Manufacturer Device Estimated Frequency LUTs / CoreCells Memory
[MHz]  % Needed Available
Xilinx XC6SLX9 75.3 807 13 4 32
Microsemi AGL60 16.4 56896 3704 2 4
Microsemi AGL250

As it is visible in the table above, the smaller Microsemi Igloo devices are too small for us. Bigger Microsemi Igloo devices however are not easily available and also quite expensive (>80$). On the other hand the Xilinx Spartan 6 FPGAs are quite spacious, immediately available and have a reasonable price (<20$). Furthermore we already use them successfully on our FPGArack board.

Personal tools
Namespaces
Variants
Actions
Navigation
Modules / Projects
Browse
Toolbox