HiRel/CanSat/Slave XBee
From FSI
Revision as of 18:55, 12 January 2015 by Francois.corthay (Talk | contribs)
The CanSat RF communication is done with the help of an XBee module.
The connection to the module is done through following pins:
name | pin | dir | description |
---|---|---|---|
data_in | b2 | in | serial link RxD |
data_out | b4 | out | serial link TxD |
reset | b6 | in | reset |
sleep_rq | b8 | in | sleep control |
RSSI_PWM | t1 | out | radio signal strength indication |
associate | t3 | out | association indication |
dio | t5 | inout | digital I/O |
sleep | t7 | out | sleep indicator |