HiRel/CanSat/Slave XBee
From FSI
Revision as of 19:00, 23 January 2015 by Oliver.gubler (Talk | contribs)
| Type | CanSat Slave XBee | Schematic | UCF | Description |
|---|---|---|---|---|
| V1.0 | 200px|CanSat Slave XBee V1.0 | CanSat Slave XBee v1.0 Schematic PDF | CanSat Slave XBee v1.0 UCF Files |
The CanSat RF communication is done with the help of an
XBee module.
The connection to the module is done through following pins:
| name | pin | dir | description |
|---|---|---|---|
| data_in | b2 | in | serial link RxD |
| data_out | b4 | out | serial link TxD |
| reset | b6 | in | reset |
| sleep_rq | b8 | in | sleep control |
| RSSI_PWM | t1 | out | radio signal strength indication |
| associate | t3 | out | association indication |
| dio | t5 | inout | digital I/O |
| sleep | t7 | out | sleep indicator |
