Kart

From FSI
Revision as of 14:56, 20 March 2015 by Oliver.gubler (Talk | contribs)
Jump to: navigation, search

Contents

The Kart module (214_Pr1) is a Summer School module for students between 2. and 3. semester. It's a home-made car remotely controlled by a smart-phone.

Summer School '13
Summer School '12
Summer School '04

Demo Kart

The work of the students can be summarized in four main tasks:

  • design and assembly of the chassis
  • analysis of the motor driver circuits (DC and stepper)
  • configuring the controlling FPGAs
  • completing and extending the GUI on the smart-phone

System Architecture

The kart is controlled by a smartphone via Bluetooth.

Distributed boards

A Bluetooth receiver on the kart communicates via an RS232 serial link with the FPGA control board.

The control is distributed over several FPGA boards connected together via I2C:

  • An I2C master receives RS232 controls, stores them in a set of registers and dispatches them at a regular interval on the I2C. The master also reads data values from the I2C, stores them into a second set of registers and sends the corresponding information at a regular rate over the RS232.
  • A DC motor controller receives a speed value and builds a PWM and a direction control.
  • A stepper motor controller receives the desired angle and builds the coil controls signals.
  • A sensor board manages I/O comprising proximity sensors, hall sensors (for the driving speed) and LEDs.

Bluetooth communication

A Bluetooth communication transfers serial port data. A receiver chip creates the RS232 signals for the FPGA. The protocol defines how the registers are accessed.

Components

FPGA Boards

The FPGA motherboards are equipped with an AGL125 IGLOO in a VQ100 package. They connect to daughterboards which drive different parts of the Kart. The motherboards are interconnected via an I2C link.

Existing daughterboards are:

Sensors

The sensors connected to the I/O board are:

Additionally, the power supply board comprises an ADC which provides the battery level.

Tasks

The presentation Programming Introduction gives you an overview about the structure of the software/hardware and your tasks.

FPGA Design

You'll get the FPGAs preprogrammed with a functional solution.

In addition you'll get HDL-Designer projects, which you have to complete or adapt.

Setup

View-pim-tasks.png

Download the ELN_kart.zip and unpack it to your U:\ drive.

Dialog-warning.png

Make sure that there is no space character in the path to ELN_kart.

Android App

One goal is to implement an Android application that controls and monitors to the kart.

Introduction

The installable package of the (or rather a) solution can be found here: Kart.apk

Android

An introduction to Android can be found here: Android Introduction

Another sample project to learn how to create vertical seek bars: Vertical SeekBar Example

Starting point

You can download the Kart eclipse project with the basic interface here: Kart.zip

You can find the instructions how to import that archive into Eclipse in the "Programming Indtroduction" presentation...

Additional Information

Personal tools
Namespaces
Variants
Actions
Navigation
Modules / Projects
Browse
Toolbox