Kart/power supply
From FSI
Revision as of 16:22, 2 June 2015 by Francois.corthay (Talk | contribs)
|
The power supply provides 3.3 V to all FPGA boards. It also provides a 5 V supply for the electronics of the DC motor controller and the sensor I/O boards.
The battery voltage is forwarded to both motor controller boards.
Power supply
The power supply comes from two 6 V battery packs. This 12 V supply is brought to the motor controller boards via two specific 2-pole connectors.
The 3.3 V and the 5 V supplies are transmitted to the FPGA boards via the I2C daisy-chain connectors
