Kart/sensor board

From FSI
Revision as of 10:03, 25 July 2014 by Francois.corthay (Talk | contribs)
Jump to: navigation, search

Contents

End of turn switch

The end of turn switch is located in the I/O board's middle row. It is the 4-pin connector closest to the 5-pin connector. The switch cable is to be connected as:

cable pin
green 5 V power supply
yellow input

The input has a pull-down resistor. Closing the switch brings a logic '1'.

Hall sensors

The sensor connectors are located in the I/O board's middle row. The sensor cable is to be connected as:

cable pin
red 3.3 V or 5 V power supply
brown sensor signal
black ground

Ultrasound ranger

The sensor connectors are located in the I/O board's middle row. It is the single 5-pin connector. The sensor cable is to be connected as:

cable pin
red 5 V power supply
yellow measurement start (trig)
green echo signal (distance)
black ground

Proximity sensors

The sensor connectors are located in the I/O board's side row.

The sensor cable is to be connected as:

cable pin
orange 3.3 V power supply
yellow SDA
green SCL
blue ground
Personal tools
Namespaces
Variants
Actions
Navigation
Modules / Projects
Browse
Toolbox