Kart/sensors/SS311PT

From FSI
(Difference between revisions)
Jump to: navigation, search
(Kart connection)
(Kart connection)
 
(One intermediate revision by one user not shown)
Line 1: Line 1:
 
{{TOC right}}
 
{{TOC right}}
  
== HONEYWELL S&C - SS311PT - SENSOR, HALL EFFEKT, BIPOLAR, SOT-23 ==
+
== Honeywell SS311PT Hall sensor ==
  
The SS311PT/SS411P sensors are small, versatile digital Hall- effect devices that are operated by the magnetic field from a permanent magnet or an electromagnet, designed to respond to alternating North and South poles.
+
The [http://sensing.honeywell.com/honeywell-sensing-ss311pt-ss411p-product-sheet-005914-1-en.pdf SS311PT/SS411P]
These bipolar sensors have enhanced sensitivity which allows for the use of smaller, often less expensive magnets. The internal pull-up resistor often eliminates the need for external components, further helping to reduce system cost. These economical bipolar sensors are suited for many simple, high- volume, cost-sensitive, rotary sensing applications.
+
digital Hall-effect sensors are operated by a magnetic field and designed to respond to alternating North and South poles.
The 2.7 Vdc to 7 Vdc supply voltage range allows this device to be used in low voltage applications.
+
  
Datasheet on Farnell: http://www.farnell.com/datasheets/524505.pdf
+
They can be powered between 2.7 Vdc to 7 Vdc.
  
* Manufacturer: '''HONEYWELL S&C'''
+
The output is open collector but has an integrated 10 kOhm pull-up resistor.
* Farnell: '''1784726'''
+
* Manufacturer Desc: '''SS311PT'''
+
  
=== Output ===
+
The [[Kart/sensor board#Hall sensors|sensor connectors]] are located in the [[Kart/sensor board|I/O board]]'s middle row.
Open collector output with integrated 10k Ohms Pull-Up resistor.
+
 
+
== Kart connection ==
+
 
+
The sensor connectors are located in the I/O board's middle row.
+
The sensor cable is to be connected as:
+
{| cellpadding="3" cellspacing="0" border="1"
+
! cable
+
! pin
+
|-
+
| red
+
| 3.3 V or 5 V power supply
+
|-
+
| brown
+
| sensor signal
+
|-
+
| black
+
| ground
+
|}
+
  
 
[[Category:Kart]]
 
[[Category:Kart]]

Latest revision as of 09:20, 25 July 2014

Contents

Honeywell SS311PT Hall sensor

The SS311PT/SS411P digital Hall-effect sensors are operated by a magnetic field and designed to respond to alternating North and South poles.

They can be powered between 2.7 Vdc to 7 Vdc.

The output is open collector but has an integrated 10 kOhm pull-up resistor.

The sensor connectors are located in the I/O board's middle row.

Personal tools
Namespaces
Variants
Actions
Navigation
Modules / Projects
Browse
Toolbox