Kart/stepper motor controller

(Difference between revisions)
Jump to: navigation, search
(Stepper motor)
(FPGA design)
Line 34: Line 34:
 
== FPGA design ==
 
== FPGA design ==
  
The stepper motor controller has to generate the 4 phases to turn the steering wheels to the desired angle.
+
The stepper motor controller has to generate the 4 phases to turn the [[Kart|kart's]] steering wheels to the desired angle.
 +
 
 +
To start, [[Kart#FPGA_Design|the design environment]] has to be downloaded.
  
 
[[Category:Kart]]
 
[[Category:Kart]]

Revision as of 13:22, 9 June 2015

Contents

The stepper motor controller FPGA generates 4 coil driving signals and receives a stepper end input.

stepper motor board

Stepper motor

The stepper motor is a Nanotec SP3575M0906-A.

It has a step angle of 7.5°, and as such 48 steps per turn.

The cables are connected as follows:

Signal Color
phase 1 white
phase 2 blue
phase 3 red
phase 4 yellow
power brown, black

FPGA design

The stepper motor controller has to generate the 4 phases to turn the kart's steering wheels to the desired angle.

To start, the design environment has to be downloaded.

Personal tools
Namespaces
Variants
Actions
Navigation
Modules / Projects
Browse
Toolbox