SEm

From FSI
Revision as of 11:12, 18 March 2019 by Marcelo.kaihara (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Contents

The Embedded Systems module presents microprocessor and FPGA systems. It highlights their differences and explains their possible interaction via serial or parallel busses.

FPGA course

The course presents:

  • the VHDL syntax, with a highlight on synthesisable code
  • different kinds of programmable devices
  • the AMBA bus

FPGA labs

The first labs concentrate on working with numbers, first unsigned and then signed. They end with the drawing of a Lissajous curve on an oscilloscope.

A further lab presents the coding of state-machines.

The following labs show the AMBA bus system. The students design a processor system and implement a simple input/output peripheral and then an UART peripheral. After this, they build System on Chip (SoC) with a processor, these first peripherals and a beamer peripheral. This additional peripheral receives X and Y coordinates, stores them and draws a spline joining all these points (e.g. some text). The spline can be viewed on an oscilloscope.

The last lab presents pipelining.

The instructions for the different laboratory sessions can be found at:

The labs environment files are provided as a Git repository on R:\SYND\SEm_225\3_Labos\Labos_cof\VHDL.

Students

Additional Information

Personal tools
Namespaces
Variants
Actions
Navigation
Modules / Projects
Browse
Toolbox