Support/hardware demonstration

(Difference between revisions)
Jump to: navigation, search
(Specification)
(Set-up)
Line 22: Line 22:
 
For the DAC solution, one additionally needs:
 
For the DAC solution, one additionally needs:
 
* a flat band cable
 
* a flat band cable
* a HEB DAC board
+
* a [http://wiki.hevs.ch/uit/index.php5/Hardware/Parallelport/DAC2 HEB DAC board]
 
* a loudspeaker board
 
* a loudspeaker board
 
* an RJ45 cable
 
* an RJ45 cable

Revision as of 12:43, 17 September 2019

Contents

The demonstration system plays tones on loudspeakers.

A button allows to define the number of bits the sinewaves are coded on: This allows to talk of binary numbers.

The foreseen outputs are:

  • a loudspeaker with a Digital to Analog Converter (DAC) and an analog amplifier
  • a loudspeaker with PWM control and a simple class D amplifier.

Set-up

In order to build the demonstration, one needs:

  • an FPGA board
  • a power supply cable
  • a flat band cable
  • a HEB board with 4 switches
  • an oscilloscope
  • an oscilloscope cable

For the DAC solution, one additionally needs:

  • a flat band cable
  • a HEB DAC board
  • a loudspeaker board
  • an RJ45 cable
  • a power supply adapter for the loudspeaker board

For the PWM solution, one additionally needs:

  • a loudspeaker box with the amplifier on the back side
  • a C-shaped FPGA board mezzanine
  • an additional oscilloscope cable

System

The following system is used to show digital electronic parts to students.

hardware demonstration system

The block diagram is:

block diagram


The FPGA design can be found in the HEI SVN.

Specifications

The operating frequencies are:

  • clock : 66 MHz
  • sampling : 44.1 kHz
Personal tools
Namespaces
Variants
Actions
Navigation
Modules / Projects
Browse
Toolbox