Support/hardware demonstration

From FSI
(Difference between revisions)
Jump to: navigation, search
Line 16: Line 16:
* a power supply cable
* a power supply cable
* a flat band cable
* a flat band cable
* a HEB board with 4 switches
* an [ HEB board with 4 rotary switches]
* an oscilloscope
* an oscilloscope
* an oscilloscope cable
* an oscilloscope cable

Latest revision as of 14:28, 18 September 2019


The demonstration system plays tones on loudspeakers.

A button allows to define the number of bits the sinewaves are coded on: This allows to talk of binary numbers.

The foreseen outputs are:

  • a loudspeaker with a Digital to Analog Converter (DAC) and an analog amplifier
  • a loudspeaker with PWM control and a simple class D amplifier.


In order to build the demonstration, one needs:

For the DAC solution, one additionally needs:

  • a flat band cable
  • a HEB DAC board
  • a loudspeaker board
  • an RJ45 cable
  • a power supply adapter for the loudspeaker board

For the PWM solution, one additionally needs:

  • a loudspeaker box with the amplifier on the back side
  • a C-shaped FPGA board mezzanine
  • an additional oscilloscope cable


The following system is used to show digital electronic parts to students.

hardware demonstration system

The block diagram is:

block diagram

The FPGA design can be found in the HEI SVN.


The operating frequencies are:

  • clock : 66 MHz
  • sampling : 44.1 kHz
Personal tools
Modules / Projects