Hardware/Parallelport/heb gia

From UIT
Jump to: navigation, search

Contents

Generic Inverting Amplifier

The board was designed for the LMC6482 OpAmp and works from -5V to 5V.

Version Photo Schematics Description
V1.0 HEB-GIA HEB-GIA Schematic PDF HEB Generic Inverting Amplifier

Notes

In contradiction to the schematic, only one inverting amplifier is mounted. This means only one channel of the jack connector can be used.

ATTENTION: The OpAmp is mounted the wrong way on the photo: pin 1 should be at the top right towards the Input connector.

Usage

The reference voltage of the Amplifier can be selected with a voltage divider between 0V and 5V.

Compatible OpAmps are:

Projects

U-SLO
Inverts the negative voltage (-10 V to 0 V) produced by the C12703 APD module for the Audio ADC DAC board (0 V to 5 V).
Personal tools
Namespaces
Variants
Actions
Navigation
Browse
Toolbox