Hardware/Parallelport/heb rs232

From UIT
Jump to: navigation, search

RS232

This extension board allows to connect to a RS232 connector. It holds a female and a male connector which are both used independently. On the male connector, the CTS and RTS lines can either way be brought to pin 7 and 8 as defined in the RS232 specification, or to pin 1 and 4, as useful in combination with the GPS antenna.

It was designed for the FPGARack board, as it contains no RS232 serial connector, but could also be used on the FPGAEBS board.

Version Photo Schematics Description
V1.0 HEB-RS232 HEB-RS232 Schematic PDF HEB RS232 connector
Personal tools
Namespaces
Variants
Actions
Navigation
Browse
Toolbox