Hardware/Parallelport/heb inverter
From UIT
Revision as of 11:20, 26 November 2021 by Francois.corthay (Talk | contribs)
|
Inverter board
The board was designed for the ETE ELN-inverter lab.
It receives 4 PWM signals to drive an H-Bridge. The bridge is followed by an LC-lowpass and a transformer.
A sigma-delta ADC reads the LC filter output and enables to adjust the output voltage.
Version | Photo | Schematics | Stock |
---|---|---|---|
V1.0 | HEB-inverter Schematic PDF | 16fully mounted |