Hardware/8CH4IOHFAnalogMuxBoard

(Difference between revisions)
Jump to: navigation, search
(Created page with "{{TOC right}} This board was created for high quality analog muxing/demuxing for demanding measurement applications. <PICTURE MISSING> = Characteristics = * 256x100mm 8 laye...")
 
m (Characteristics)
Line 8: Line 8:
 
* 8 <-> 1 channels
 
* 8 <-> 1 channels
 
* 4 I/O per channels (ground commuted with the signal, so no common ground)
 
* 4 I/O per channels (ground commuted with the signal, so no common ground)
 +
* SMA or SMB connectors
 
* HF signal relay based solution
 
* HF signal relay based solution
 
* Balanced tree routage (same trace distance for any commuted channel)
 
* Balanced tree routage (same trace distance for any commuted channel)

Revision as of 10:31, 24 August 2016

Contents

This board was created for high quality analog muxing/demuxing for demanding measurement applications. <PICTURE MISSING>

Characteristics

  • 256x100mm 8 layers PCB
  • 8 <-> 1 channels
  • 4 I/O per channels (ground commuted with the signal, so no common ground)
  • SMA or SMB connectors
  • HF signal relay based solution
  • Balanced tree routage (same trace distance for any commuted channel)
  • 50Ohms impedance controlled shielded coaxial traces
  • 1xLED per channel (light when selected) + 1x power LED.
  • 1x 2mm-pitched 2x6 connector.

Some plots : <PICTURES MISSING>

Power supply / driving considerations

This board doesn't have any driving circuit on it. The following signals can be found on the connector :

Changelog / Known issues

  • None.

Contacts / Collaborators

This board was initially targeted for Joseph Moerschell's projects (MFS, gal's and mlo's master thesis).

Project manager :

Design/Schematics :

PCB routing :

Personal tools
Namespaces
Variants
Actions
Navigation
Browse
Toolbox