Hardware/FPGAPoetic

(Difference between revisions)
Jump to: navigation, search
(VME connector logic levels)
(Programmation)
Line 38: Line 38:
  
 
= Programmation =
 
= Programmation =
This board can be programmed in 2 ways,
+
V1.0 is only programmable via JTAG.
* first the FPGA can be directly programmed
+
* second the FPGA can be programmed via the onboard Flash memory
+
 
+
For more explanation see at the Howto below:
+
* [[Hardware/FPGARack/Programmation|FPGA Rack Programmation]]
+
  
 
= Links =
 
= Links =

Revision as of 09:49, 1 October 2021

Contents

The basic idea behind this board is to have a development FPGA board, with a choice of big FPGA's and a VME compatible 2U Rack connector. The stock can be verified and updated on-line.

Type FPGA Rack Schematic UCF Description
V1.0 FPGA Rack V1.0 FPGA-Rack v1.0 Schematic PDF FPGA-Rack v1.0 UCF Files There are different FPGA mounted: Spartan 6 XC6SLX45, Spartan 6 XC6SLX100, Spartan 6 XC6SLX150

The boards are compatible with the FPGA Rack Backplane for interconnecting different boards with the help of the HES-SO Backplane Bus and the HES-SO VME IP Core.

A VHDL test code with the default UCF Files can be found at the EDA SVN Repository:

Leds and Buttons

There are 4 Dil switches and 4 Leds mounted on the FPGARack board. They are not properly indicated 0 - 3 therefore see the image below.

FPGA Rack V1.0 Leds and Buttons

Features

  • 2 Port Ethernet (one PTP physical)
  • USB FTDI
  • 2 UART
  • Flash 128Mb - 512Mb
  • Ram 128Mb - 256Mb
  • Spartan 6 LX45 - LX100 - LX150
  • 4 Leds
  • 4 Dil Switches
  • 1 Button
  • 106.25MHz Main Clock
  • VME compatible connector 3x32Pin
  • 2 Debug connectors 2x50Pin
  • 2 Mezzanine Connector ARM-EBS and FPGA-EBS compatible
  • Powered by USB or VME Power

Programmation

V1.0 is only programmable via JTAG.

Links

Personal tools
Namespaces
Variants
Actions
Navigation
Browse
Toolbox