Hardware/Interfaces
(Difference between revisions)
(Created page with "{{TOC right}} == USB to CAN interface == USB TO CAN interface USB TO CAN interface USB TO CAN interface from IXXAT === User ...") |
(→USB to CAN interface) |
||
Line 2: | Line 2: | ||
== USB to CAN interface == | == USB to CAN interface == | ||
[[File:usb_to_can.jpg|300px|USB TO CAN interface]] | [[File:usb_to_can.jpg|300px|USB TO CAN interface]] | ||
− | |||
USB TO CAN interface from IXXAT | USB TO CAN interface from IXXAT | ||
Line 31: | Line 30: | ||
| 9 || USB 5V supply | | 9 || USB 5V supply | ||
|} | |} | ||
+ | [[File:Db9M.jpg|100px|DB-9 connector]] | ||
=== HEIV modifications === | === HEIV modifications === | ||
Line 38: | Line 38: | ||
A wire has been added to place the USB voltage on DB-9 pin 9. | A wire has been added to place the USB voltage on DB-9 pin 9. | ||
A 0 ohms resistor has been added to connect the CAN_GND with the supply GND. | A 0 ohms resistor has been added to connect the CAN_GND with the supply GND. | ||
+ | |||
+ | [[File:Usb can modif.JPG|261px|Modifications]] |
Revision as of 14:44, 8 February 2013
|
USB to CAN interface
USB TO CAN interface from IXXAT
User DB-9 connector
Pin Nr. | Signal |
---|---|
1 | - |
2 | CAN-LOW |
3 | GND (both CAN & supply) |
4 | - |
5 | - |
6 | - |
7 | CAN-HIGH |
8 | - |
9 | USB 5V supply |
HEIV modifications
This interface has been modified to have a 5V supply on the DB-9 connector. On this pin, you can draw a current of 300 [mA].
Modifications details
A wire has been added to place the USB voltage on DB-9 pin 9. A 0 ohms resistor has been added to connect the CAN_GND with the supply GND.