Hardware/Parallelport/heb gia

From UIT

(Difference between revisions)

Jump to: navigation, search

Latest revision as of 11:16, 23 September 2014

The board was designed for the LMC6482 OpAmp and works from -5V to 5V.

Version	Photo	Schematics	Description
V1.0		HEB-GIA Schematic PDF	HEB Generic Inverting Amplifier

In contradiction to the schematic, only one inverting amplifier is mounted. This means only one channel of the jack connector can be used.

ATTENTION: The OpAmp is mounted the wrong way on the photo: pin 1 should be at the top right towards the Input connector.

The reference voltage of the Amplifier can be selected with a voltage divider between 0V and 5V.

Compatible OpAmps are:

U-SLO: Inverts the negative voltage (-10 V to 0 V) produced by the C12703 APD module for the Audio ADC DAC board (0 V to 5 V).

@@ Line 10: / Line 10: @@
 | V1.0 ||[[File:HEB GIA.png|200px|HEB-GIA]] || [[Media:heb_gia.pdf|HEB-GIA Schematic PDF]] || HEB Generic Inverting Amplifier
 |}
+== Notes ==
+In contradiction to the schematic, only one inverting amplifier is mounted. This means only one channel of the jack connector can be used.
+ATTENTION: The OpAmp is mounted the wrong way on the photo: pin 1 should be at the top right towards the Input connector.
 == Usage ==
 The reference voltage of the Amplifier can be selected with a voltage divider between 0V and 5V.
+Compatible OpAmps are:
+* [http://www.ti.com/product/lmc6482 LMC6482]
+* [http://www.microchip.com/wwwproducts/Devices.aspx?product=MCP602 MCP602]
 === Projects ===