Hardware/Parallelport/heb rs232

From UIT
Revision as of 14:51, 8 September 2014 by Guo (Talk | contribs)
Jump to: navigation, search

RS232

This extension board allows to connect to a RS232 connector. It holds a female and a male connector which are both used independently. On the male connector, the CTS and RTS lines can either way be brought to pin 7 and 8 as defined in the RS232 specification, or to pin 1 and 4, as useful in combination with the GPS antenna.

It was designed for the FPGARack board, as it contains no RS232 serial connector, but could also be used on the FPGAEBS board.

Version Photo Schematics Description
V1.0 HEB-RS232 HEB-RS232 Schematic PDF HEB RS232 connector

Usage

The reference voltage of the Amplifier can be selected with a voltage divider between 0V and 5V. The amplifier gain can be

Projects

PTP
Connects a GPS antenna to the FPGA.
Personal tools
Namespaces
Variants
Actions
Navigation
Browse
Toolbox