Tools/Eclipse4STM32
(Difference between revisions)
| Line 40: | Line 40: | ||
* Unzip into c:\xdev\tools\openocd\0.7 (openocd-0.7.0.exe should be in C:\xdev\tools\openocd\0.7.0\bin) | * Unzip into c:\xdev\tools\openocd\0.7 (openocd-0.7.0.exe should be in C:\xdev\tools\openocd\0.7.0\bin) | ||
* rename openocd-0.7.0.exe into openocd.exe | * rename openocd-0.7.0.exe into openocd.exe | ||
| + | * [[File:libusb-win32_stlink_driver-120229.zip]] | ||
= Eclipse = | = Eclipse = | ||
| Line 47: | Line 48: | ||
* Mobile and Device Development : C/C++ Hardware Debugging | * Mobile and Device Development : C/C++ Hardware Debugging | ||
* Subversive SVN Team provider + subversive connector | * Subversive SVN Team provider + subversive connector | ||
| − | * After | + | * After setup and restart, subversive should ask to choose a connector, choose: |
* SVNkit 1.7.9 | * SVNkit 1.7.9 | ||
Revision as of 11:03, 15 July 2013
|
Toolchain
The toolchain we use comes from https://launchpad.net/gcc-arm-embedded. This is a toolchain maintained by ARM employees and is available for Linux, Windows and OS X.
Linux (Ubuntu based)
There is a PPA for gcc-arm-embedded.
sudo add-apt-repository ppa:terry.guo/gcc-arm-embedded sudo apt-get update sudo apt-get install build-essential gcc-arm-none-eabi
Linux (generic)
- Download gcc-arm-none-eabi-4_7-2013q2-20130614-linux.tar.bz2
- Uncompress into /opt (arm-none-eabi-ld should be in /old/opt/xdev/gcc-arm-none-eabi-4_7-2013q1/bin/)
Windows
- download gcc-arm-none-eabi-4_7-2013q2-20130614-win32.zip
- unzip in C:\xdev\tools\gcc-arm\4.7_2013q2 (arm-none-eabi-gcc.exe should be in C:\xdev\tools\gcc-arm\4.7_2013q2\bin)
- download gnuwin-make-3.81.zip
- unzip in c:\xdev\tools\gnuwin\make\3.81 (make.exe should be in c:\xdev\tools\gnuwin\make\3.81\bin)
- add make.exe to your PATH.
openocd
Linux
- install openocd (should be in the repository of your favorite distribution)
- create the file /etc/udev/rules.d/10-jtag.rules whith the following content:
# STM32f407 discovery (stlink and DFU mode) ATTRS{idProduct}=="cff8", ATTRS{idVendor}=="0403", MODE="666", GROUP="plugdev" ATTRS{idProduct}=="3748", ATTRS{idVendor}=="0483", MODE="666", GROUP="plugdev" # Amontec JTAGkey 2 ATTRS{idProduct}=="df11", ATTRS{idVendor}=="0483", MODE="666", GROUP="plugdev"
- make sure you're in the plugdev group
Windows
- Download and install openocd-0.7.0
- Unzip into c:\xdev\tools\openocd\0.7 (openocd-0.7.0.exe should be in C:\xdev\tools\openocd\0.7.0\bin)
- rename openocd-0.7.0.exe into openocd.exe
- File:Libusb-win32 stlink driver-120229.zip
Eclipse
Tested with eclipse 4.3 (Kepler), but at least works with Juno (4.2) and Indigo (4.1)
- Help -> Install new software ... -> work with "-- All available sites --" and add at least :
* Programming Languages : C/C++ development Tools * Mobile and Device Development : C/C++ Hardware Debugging * Subversive SVN Team provider + subversive connector
- After setup and restart, subversive should ask to choose a connector, choose:
* SVNkit 1.7.9
