Tools/Eclipse4STM32

(Difference between revisions)
Jump to: navigation, search
(Goal)
(openocd -> 0.8.0)
Line 116: Line 116:
  
 
== Windows ==
 
== Windows ==
* Download and install [http://www.freddiechopin.info/en/download/category/4-openocd?download=99%3Aopenocd-0.7.0 openocd-0.7.0]
+
* Download and install [http://www.freddiechopin.info/en/download/category/4-openocd?download=109%3Aopenocd-0.8.0 openocd-0.8.0]
* Unzip into c:\xdev\tools\openocd\0.7 (openocd-0.7.0.exe should be in C:\xdev\tools\openocd\0.7.0\bin)
+
* Unzip into c:\xdev\tools\openocd\0.8 (openocd-0.8.0.exe should be in C:\xdev\tools\openocd\0.8.0\bin)
* rename openocd-0.7.0.exe into openocd.exe
+
* rename openocd-0.8.0.exe into openocd.exe
 
+
* For stm32f4discovery : download and run zadig from [http://zadig.akeo.ie zadig site]
+
** There is a version for XP and another for newer windows.
+
** Connect the usb discovery board to the host machine
+
** Run zadig
+
** Show all devices (options->List all devices)
+
** Select the "stlink" from the list
+
** Select "WinUSB" driver
+
** Install it
+
  
 
* For HEIVS Armebs4 download this driver : [[File:armebs4_windows_drivers.zip]]
 
* For HEIVS Armebs4 download this driver : [[File:armebs4_windows_drivers.zip]]
Line 141: Line 132:
 
**** options > show all
 
**** options > show all
 
**** select armebs4 v01 interface0
 
**** select armebs4 v01 interface0
**** select libusb-win32 (1.2.6.0)
+
**** select Winusb
**** click replace driver
+
**** click Install driver
 +
 
 +
* for the stm32f4 discovery
 +
* Download and run zadig from [http://zadig.akeo.ie zadig site]
 +
** There is a version for XP and another for newer windows.
 +
** Connect the board to the host machine
 +
** Run zadig
 +
** Show all devices (options->List all devices)
 +
** Select "stlink" from the list
 +
** Select "WinUSB" driver
 +
** Install it
 +
 
  
 
= Eclipse =
 
= Eclipse =

Revision as of 10:24, 9 July 2014

Contents

Goal

Install a click-and-run IDE for stm32f4 based boards.

This HOWTO has been tested on:

* ubuntu 13.04 64 bits
* windows xp sp3
* windows 7 64 bits

Using :

* HEIVs armebs4 (stm32_camera board).
* ST's stm32f4discovery board.

Feel free to contribute (by editing or by email).

The big picture

Here is an overview of the tools :

Eclipse stm32.png

Detailed description

Hardware:

* JTAG adapter
  * Connects physically the host computer to the target, usually from USB to JTAG.
  * Can be integrated into the target
* Target board
  * HEIVs ARMEBS4 integrates a "jtagusb" JTAG adapter
  * ST stm32f4discovery integrates a st-link v2 JTAG adapter

Software:

* Eclipse + CDT
  * IDE with c/c++ support
* make
  * The classical program builder
* gcc, ld, as, ...
  * GNU compiler, linker, assembler, ...
* gdb
  * GNU debugger
* openocd
  * Tranlate GDB orders into JTAG commands

Source files

* Application source file
  * Your application
* libheivs_stm32
  * Collection of source files from various vendors (ST, ARM, ..., HEIVs) to be used on stm32 boards

Toolchain

The toolchain we use comes from https://launchpad.net/gcc-arm-embedded. This is a toolchain maintained by ARM employees and is available for Linux, Windows and OS X.

Linux (Ubuntu based)

There is a PPA for gcc-arm-embedded.

sudo add-apt-repository ppa:terry.guo/gcc-arm-embedded
sudo apt-get update
sudo apt-get install build-essential gcc-arm-none-eabi

Linux (generic)

Windows

openocd

Linux

  • install openocd (should be in the repository of your favorite distribution)
  • create the file /etc/udev/rules.d/10-jtag.rules whith the following content:
#
# \file /etc/udev/rules.d/10-jtag.rules
# \brief udev rules for drivers and ownership for ARMEBS4-like boards
# \author marc dot pignat at hevs dot ch
# \rev 1.0
#
# The ownership will be set to the 'plugdev' group
#
 
#
# AMREBS4-like (FTDI) integrated debugger and serial port
#
ATTRS{idProduct}=="3100", ATTRS{idVendor}=="08ee", MODE="666", GROUP="plugdev", RUN="/etc/udev/armebs4-serial.sh"
 
#
# STM32F4 discovery board (stlink-v2 and DFU)
#
ATTRS{idProduct}=="3748", ATTRS{idVendor}=="0483", MODE="666", GROUP="plugdev"
ATTRS{idProduct}=="df11", ATTRS{idVendor}=="0483", MODE="666", GROUP="plugdev"
 
#
# Amontec JTAGkey 2
#
ATTRS{idProduct}=="cff8", ATTRS{idVendor}=="0403", MODE="666", GROUP="plugdev"
  • create the file /etc/udev/armebs4-serial.sh whith the following content:
#!/bin/sh
#
# \file         /etc/udev/armebs4-serial.sh
# \brief        Load the ftdi sio (CDC) driver and add the ARMEBS4 VID+PID
# \author       marc dot pignat at hevs dot ch
# \rev          1.0
#
 
modprobe ftdi_sio
echo 08ee 3100 ff > /sys/bus/usb-serial/drivers/ftdi_sio/new_id
  • make sure you're in the
    plugdev
    and
    dialout
    groups

Windows

  • Download and install openocd-0.8.0
  • Unzip into c:\xdev\tools\openocd\0.8 (openocd-0.8.0.exe should be in C:\xdev\tools\openocd\0.8.0\bin)
  • rename openocd-0.8.0.exe into openocd.exe
  • For HEIVS Armebs4 download this driver : File:Armebs4 windows drivers.zip
    • login as administrator
    • unzip the file
    • connect the armebs4 (usb debug port)
        • windows will fail installing drivers that is normal
    • open the device manager
      • on every ARMEBS4 devices do ( == 4 times) :
        • right-click update driver software... > browse my computer > search in the previously unzipped folder > install this driver anyway
        • redo-it on the 3 "usb serial port" which seem to have problems in the device manager (don't ask me why there are only 3...)
      • run zadig-2.10.exe from zadig site
        • options > show all
        • select armebs4 v01 interface0
        • select Winusb
        • click Install driver
  • for the stm32f4 discovery
  • Download and run zadig from zadig site
    • There is a version for XP and another for newer windows.
    • Connect the board to the host machine
    • Run zadig
    • Show all devices (options->List all devices)
    • Select "stlink" from the list
    • Select "WinUSB" driver
    • Install it


Eclipse

Tested with eclipse 4.3 (Kepler), but at least works with Juno (4.2) and Indigo (4.1)

  • Help -> Install new software ... -> work with "-- All available sites --" and add at least :
    • Programming Languages : C/C++ development Tools
    • Mobile and Device Development : C/C++ Hardware Debugging
    • Mobile and Device Development : C/C++ Cross compiler support
    • Collaboration : Subversive SVN Team provider + subversive connector
  • After setup and restart, subversive should ask to choose a connector, choose:
    • SVNkit 1.7.9

Openocd from eclipse

  • Run->external tool configuration...
  • Program -> new
 * Location:
   * linux : /usr/bin/openocd
   * windows : c:\xdev\tools\openocd/0.7.0/bin/openocd.exe
 * Working directory : empty
 * arguments :
   * ARMEBS4 : -f "${workspace_loc}/libheivs_stm32/armebs4.cfg"
   * stm32f4discovery : -f board/stm32f4discovery.cfg

Project Setup

In the project properties make sure

  • C/C++ build > settings -> Settings tab : "Cross settings" :
    • prefix : "arm-none-eabi-"
    • path (windows) : "C:\xdev\tools\gcc-arm\4.7_2013q2\bin"
    • path (Linux generic) : "/opt/xdev/gcc-arm-none-eabi-4_7-2013q2/bin/"
    • path (Unbutu based) : arm-none-eabi- tools are in the PATH.
  • C/C++ build > settings -> Settings tab : "Cross GCC compiler" :
    • Symbols :
      • BOARD_STM32_CAMERA or BOARD_STM32F4_GEVAL or BOARD_STM32_CAMERA or BOARD_ARMEBS4 depending on your board
    • Includes :
      • "${workspace_loc:/${ProjName}/libheivs_stm32/include}"
      • "${workspace_loc:/${ProjName}}"
    • Optimization : -O2 for normal use and -O0 for laboratories
    • Debugging:
      • Maximum -g3
      • Warnings:
        • -Wall
      • Miscellaneous
        • "-c -fmessage-length=0 -mthumb -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16"
    • C/C++ build > settings -> Settings tab : "Cross GCC linker" :
      • General :
        • No shared libraries (-static)
      • Libraries
        • "m", "c" and "nosys"
      • Miscellaneous
        • Linker flags : "-T "${workspace_loc:/${ProjName}/libheivs_stm32/stm32f407ig_flash.ld}" -mthumb -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16"
        • Other options (-Xlinker [option])
        • -Map=linker.map
        • --gc-sections
    • C/C++ build > settings -> Settings tab : "Cross GCC assembler" :
      • General:
        • Assembler flags : "-mthumb -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -g3"
    • Debug settings
      • Debug configuration -> GDB Hardware debugging
        • At the bottom of the page, make sure the project uses "Standard Hardware Debugging Laucher" (DSF won't work).
      • Debugger tab
        • GDB command (Ubuntu based) : "arm-none-eabi-gdb"
        • GDB command (Linux generic) : "/opt/xdev/gcc-arm-none-eabi-4_7-2013q2/bin/arm-none-eabi-gdb"
        • GDB command (Windows) : "C:\xdev\tools\gcc-arm\4.7_2013q2\bin\arm-none-eabi-gdb.exe"
        • Use remote target : checked
        • JTAG Device : Generic TCP/IP, localhost 3333
      • Startup tab
        • Eclipse-gdb hardware debugging-startup.png
        • disable Reset and delay (this command is not supported by openocd)
        • disable halt
        • commands (This will make sure the core is in a known state)
          • monitor reset halt
          • monitor flash erase_sector 0 0 0
          • monitor reset halt
        • Load image : use project binary (this will load the software to flash)
        • Load symbols : use project binary (no debugging without symbols)
        • Set breakpoint at main
        • Run commands ( 1) reset the cpu -> reload PC 2) enable clock when in WFI 3) run to main
          • monitor reset halt
          • set *(uint32_t *)0xe0042004 = 0x00000001
          • continue
      • Common tab
        • Save as shared file, so the debugging parameters will be saved into the project.
Personal tools
Namespaces
Variants
Actions
Navigation
Browse
Toolbox