Tools/EclipseArmebs4/SetupWindows/2014-09-05

This document explains how to setup the ARMEBS4 on your computer, the current versions used are:

• Eclipse Luna (4.4)
• gcc-arm-none-eabi - 4_8-2014q2-20140609-win32
• Openocd - 0.8.0
• MSYS - 1.0.11
• make - 3.8.1
• Zadig - 2.1.0
• ARMEBS4 drivers - 1.0.1.0

Prerequisites

• Get an ARMEBS4 Suitcase(ask someone from the ARMBES4 team
  • Verify it's content:
    • An ARMEBS4 board
    • A USB cable (A -> micro B)
• A computer
  • With a 64 bit windows (Tested on 7)
  • A USB port
  • 1GByte free HDD space (on C:)
  • You MUST have administrator right to run this setup
• Get the setup file ARMEBS4-WIN64-2014-09-05.zip

Setup

• Install the Java JDK (SW_SOURCE/setup/jdk-8u20-windows-x64.exe)
  • Follow the steps, there is no special destination requirements
• unzip setup.zip to c:\Programs
  • You MUST obtain c:\Programs\ARMEBS4\2014-09-05
  • Don't use "C:\Program Files\", the space will cause problems
• Feel free to create a shortcut to c:\Programs\ARMEBS4\2014-09-05\start.bat on your desktop.