Tools/EclipseArmebs4/SetupWindows/2014-09-16

From UIT
Revision as of 07:58, 16 October 2014 by Pim (Talk | contribs)
Jump to: navigation, search

Contents

This document explains how to setup the ARMEBS4 on your computer.

This setup has been tested on :

  • Windows XP SP3 - 32 bits
  • Windows 7 SP1 - 64 bits
  • Windows 8.1 - 64 bits

Current versions

  • Eclipse Luna (4.4 - 32 bits)
  • gcc-arm-none-eabi - 4_8-2014q2-20140609-win32
  • Openocd - 0.8.0
  • MSYS - 1.0.11
  • make - 3.8.1
  • Zadig - 2.1.0
  • ARMEBS4 drivers - 1.0.1.0
  • Java SE Development Kit 8u20 (32 bits)
  • svn - 1.8.10
  • doxygen - 1.8.8

ChangeLog

Changes from the preceding version

  • Java JDK integrated
    • The cost is 440 MBytes disk space, but the ARMEBS4 tools are fully constrained => no problems with others JRE/JDK installed
    • No changes to the windows registry ;)
  • Added subversion and doxygen
  • Added offline (doxygen generated) documentation
  • Added link to online and offline documentation
  • Now use an installer (instead of .zip)

Prerequisites

  • Get an ARMEBS4 Suitcase (ask someone from the ARMBES4 team)
    • Verify it's content:
      • An ARMEBS4 board
      • A USB cable (A -> micro B)
  • A computer
    • With a 64 bit windows (Tested on 7)
    • A USB port
    • 2 GByte free HDD space
    • You MUST have administrator right to run this setup
  • Get the setup file armebs4-windows-YYYY-MM-DD.exe

Setup

  • run armebs4-windows-YYYY-MM-DD.exe
    • Don't use "C:\Program Files\" as destination, the space will cause problems
    • Remember where you install it.

Drivers

windows 8 users : Driver signature enforcement must be disable before the next steps (here is a how to).

  • Connect the ARMEBS4 board to the computer using the provided USB cable : Armebs4 usb debug.png
    • The Connector is labelled "debug"
    • The green PWR led should be lit
  • Wait for automatic drivers installation fail
  • Open the Device manager
    • Select "View > Devices by connection"
    • You should see 1 device with a yellow warning symbol : Armebs4 device manager one device.png
      • right-click update driver software... > browse my computer > c:\Programs\ARMEBS4\2014-09-16\tools\drivers > > install this driver anyway
    • You should see 4 devices with a yellow warning symbol and a ARMEBS4 name : Armebs4 device manager.png
    • For each device do (-> 4 times) :
      • right-click update driver software... > browse my computer > c:\Programs\ARMEBS4\2014-09-16\tools\drivers > > install this driver anyway
    • Now you've got 3 usb serial ports (and don't ask me why there are only 3...)
    • For each usb serial port with the warning do (-> 4 times) :
      • right-click update driver software... > browse my computer > c:\Programs\ARMEBS4\2014-09-16\tools\drivers > > install this driver anyway
  • run C:\Programs\ARMEBS4\2014-09-16\tools\zadig\zadig.exe
    • options > List all devices
    • select armebs4 v1.1 (Interface0)
    • select Winusb
    • click on the big button "Replace Driver" or "Reinstall Driver"

Where to go from here ?

First steps

Personal tools
Namespaces
Variants
Actions
Navigation
Browse
Toolbox