The Kart module (214_Pr1) is a Summer School module for students between the 2nd and the 3rd semester. It is a home-made model car remotely controlled by a smartphone.
The work of the students can be summarized in four main tasks:
- design and assembly of the chassis and the body
- analysis of the DC motor
- configuration of the controlling FPGAs
- completion and extension of the control GUI on the smartphone
Take a look at the karts gallery !
The kart is controlled by a smartphone via Bluetooth.
The design is separated over four different modules:
- A DC motor controller receives a prescaler and a speed value to build the corresponding PWM and direction signals.
- A stepper motor controller receives a prescaler and the desired angle and builds the coil controls signals.
- A sensor controller manages I/O comprising hall sensors (to retrieve the driving speed), LEDs, buttons, and a range finder (to get the distance from an obstacle).
- A control registers manager retrieve various information of the Kart and can play test sequences.
The programming introduction gives an overview about the structure of the software/hardware and the students' tasks. They comprise:
- FPGA design for driving the hardware and reading the sensors
- Android application development for the remote control
The students receive FPGA boards preprogrammed with a functional solution and androïd phones with a demo application. This allows to start the development either with the FPGA design or the Android application development.
A FPGA design environment is available, based on:
- HDL designer for graphical design entry
- ModelSim for simulation
- Libero IDE for synthesis and programming
With this, the following designs have to be completed:
- the DC motor controller FPGA has to generate the PWM and direction signals for the propulsion motor
- the stepper motor controller FPGA has to generate the 4 phases to turn the steering wheels to the desired angle
- the I/O control FPGA has to count the propulsion wheels' rotations and can count the ultrasound ranger distance.
One goal is to implement an Android application that controls and monitors the kart.
The installable package of the (or rather a) solution can be found here: Kart.apk
- You can download the Kart project with the minimal interface here: Kart.zip
- You can find the instructions how to open the project in Android Studio in the programming introduction presentation...
- The online documentation of all Java classes that are at your disposition is [here]
- If you need timers, please do not use Java standard Timer and TimerTask, we provide a dedicated Timer class in the package ch.hevs.utils.Timer.
- To be informed when a register is modified by the kart (i.e. the hall sensor counter value has changed), your application has to implement the KartStatusRegisterListener interface. This will force your application to have a method (statusRegisterHasChanged) that will be called when a register value has changed. Don't forget to register your listener to the Kart (kart.addStatusRegisterListener(...)).
- Don't block the main thread with an infinite loop
- Don't change the orientation of the display during the execution, it can crash the BT communication. Do it in the Manifest.
If you need to test your Android application against a Kart and your Kart is either not build yet or not available at the moment, you can install the Virtual Kart application and use the Kart Bluetooth to USB adapter board.
The power supply board provides the 5 V and the 3.3 V to the other boards. This is generated from two 6 V battery packs.
The power supply board also comprises an ADC which provides the battery level.
They hold daughterboards which drive different parts of the Kart. The motherboards are interconnected via an I2C link.
The FPGA motherboards can be tested with the help of a dedicated test board which runs a signal from one I/O pin to the next.
Existing daughterboards are:
- a Bluetooth interface board
- a DC motor controller
- a stepper motor controller
- an I/O board for the sensors
- an FPGA test board
The sensors connected to the I/O board are:
- 1 to 4 VCNL4000 I2C Distance/Ambience Light Sensor
- 1 to 2 SS311PT Hall Sensor
- 1 ultrasound ranger
- 1 end of turn contact switch