Support/hardware demonstration

From FSI
Jump to: navigation, search

Contents

The demonstration system plays tones on loudspeakers.

A button allows to define the number of bits the sinewaves are coded on: This allows to talk of binary numbers.

The foreseen outputs are:

  • a loudspeaker with a Digital to Analog Converter (DAC) and an analog amplifier
  • a loudspeaker with PWM control and a simple class D amplifier.

Set-up

In order to build the demonstration, one needs:

For the DAC solution, one additionally needs:

  • a flat band cable
  • a HEB DAC board
  • a loudspeaker board
  • an RJ45 cable
  • a power supply adapter for the loudspeaker board

For the PWM solution, one additionally needs:

  • a loudspeaker box with the amplifier on the back side
  • a C-shaped FPGA board mezzanine
  • an additional oscilloscope cable

System

The following system is used to show digital electronic parts to students.

hardware demonstration system

The block diagram is:

block diagram


The FPGA design can be found in the HEI SVN.

Specifications

The operating frequencies are:

  • clock : 66 MHz
  • sampling : 44.1 kHz
Personal tools
Namespaces
Variants
Actions
Navigation
Modules / Projects
Browse
Toolbox