High Voltage GridLab/Protection and Automation Test Bench/Switchbox

From GridLab

(Difference between revisions)

Jump to: navigation, search

Latest revision as of 12:23, 31 October 2014

@@ Line 1: / Line 1: @@
 {{TOC right}}
 This is the switchbox of the [[High_Voltage_GridLab/Protection_and_Automation_Test_Bench|Protection and Automation Test Bench]].
-== Todo ==
-=== Software ===
-==== Protocol ====
-* Create negative acknowledge message (NACK)
-==== PC Software ====
-* Send request to read switches and LEDs only if last request was answered or at least with a small delay in between.
-* Implement the answering of bad messages with a negative acknowledge.
-* Handle errors (message answered with a negative acknowledge).
-* By setting all relays to one side lots of setRelay messages are send. Sending only one setAllRelay message would be more appropriate.
-==== PIC ====
-* Implement the answering of bad messages with a negative acknowledge.
-* Handle errors (message answered with a negative acknowledge).
 [[Category:High Voltage GridLab]]
 [[Category:Protection and Automation Test Bench]]