Hardware/CubeSat Gumstix/camera connector

From UIT
Revision as of 13:34, 29 October 2015 by Francois.corthay (Talk | contribs)
Jump to: navigation, search

Contents

Connector

The connector layout is:

connector
pin
signal FPGA
pin
function
1 3.3 V power supply
2 GND
3 TxD / SCLK A4 RS232 / I2C control
4 RxD / SDA B10
5 Frame valid / VSync A5 frame control
6 Line valid / HRef C5
7 Data valid B6
8 Pixel clock A10
9 D0 A6 frame data
10 D1 D6
11 D2 A7
12 D3 C6
13 D4 B8
14 D5 C7
15 D6 A8
16 D7 D8
17 D8 A9
18 D9 C8
19 D10 A13
20 D11 C9
21 CC1 / ExtSync A14 camera control
22 CC2 / XCLK C14
23 CC3 / Reset B14
24 CC4 / PowerDn D14

Camera modules

The connector is meant for use with different camera modules.

OV7670

The OV7670 camera module has:

  • 640×480 pixel VGA resolution
  • 8 bit (4:2:2) data
  • an I2C control interface
Camera OV7670.jpg

Photonfocus

Foreseen: OEM-D1024E-160-LC, RS232 control

Camera Photonfocus.jpg
Personal tools
Namespaces
Variants
Actions
Navigation
Browse
Toolbox