Tools/Laser cutter

From UIT
Revision as of 12:36, 27 August 2020 by Francois.corthay (Talk | contribs)
Jump to: navigation, search

Contents

The HEI owns 2 laser cutting machines:

  • a 40 W xxx in AE07
  • a xx W xxx in Cxxx

The machines are seen as printers. The xxx printer driver allows to transfer the drawings to the laser cutter. The printer driver recognizes xxx specific colors which are translated into laser power and speed values.

Preparing for print

From Inkscape

  • Make sure to have everything drawn to the base colors known by the printer.
  • Set-up the page size to match the pint bed's.
  • Transform all the lines foreseen for cutting to a width smaller than 0.01 mm.
  • Save the drawing as a PDF and open it with a PDF viewer.

Printing

  • power-on the laser cutter
  • in AE07 (only ?) power-on the ventilation system
  • print the file, verify the printer settings
  • the laser should show it has receive3d the file
  • press the green button to start
Personal tools
Namespaces
Variants
Actions
Navigation
Browse
Toolbox