Hardware/ARMEBS/4/DFU

From UIT

Revision as of 15:44, 17 September 2014 by Pim (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Contents

1 dfu-util
- 1.1 .bin file generation

FIXME finish this page

The USB specification defines a mode for updating USB device called DFU (Device Firmware Update), see 1.1 specification.

The microcontroler on the ARMEBS4 board supports this protocol.

dfu-util

This command :

dfu-util -a 0 -d 0483:df11 -s 0x08000000:leave -D leds.bin

Will flash the leds.bin on the ARMEBS4 then run the code.

`.bin` file generation

Retrieved from "https://wiki.hevs.ch/uit/index.php5?title=Hardware/ARMEBS/4/DFU&oldid=3881"

Personal tools

Log in

Browse

Toolbox