HiRel/CanSat/Slave Sensors
(Created page with "{{private}} {{TOC right}} Following sensors are used: * HIH-5030-001S 480-4966-ND Humidity Sensor * TC1046VNBTR Temperature Sensor * MPXH6115A6U Pressure Sensor * 74LVCH2T4...") |
|||
(18 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
− | |||
{{TOC right}} | {{TOC right}} | ||
− | |||
− | * HIH-5030-001S | + | {|class=wikitable |
− | * TC1046VNBTR | + | |- |
− | * MPXH6115A6U | + | ! Type || CanSat Slave Sensor || Schematic || Description |
− | + | |- | |
− | + | | V1.0 || [[TBD|200px|CanSat Slave Sensor V1.0]] || [[Media:P-CAD_EDA_-_FPGA-CanSat_Slave_Sensor.pdf|CanSat Slave Sensor v1.0 Schematic PDF]] || | |
+ | |- | ||
+ | |} | ||
+ | |||
+ | = Sensors = | ||
+ | |||
+ | The sensors board comprises: | ||
+ | * a [http://sensing.honeywell.com/product-page?pr_id=44871 HIH-5030-001S] humidity sensor | ||
+ | * a [http://www.microchip.com/wwwproducts/Devices.aspx?product=TC1046 TC1046VNBTR] temperature sensor | ||
+ | * a [http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPXx6115 MPXH6115A6U] pressure sensor | ||
+ | |||
+ | = Mixed-Signal I/O = | ||
+ | |||
+ | The analog inputs are digitized with the help of a [http://www.maximintegrated.com/en/products/analog/data-converters/analog-to-digital-converters/MAX11300.html 20-Port Programmable Mixed-Signal I/O] MAX11300. | ||
+ | The board pinout is compatible with the one of the [http://www.maximintegrated.com/en/products/analog/data-converters/analog-to-digital-converters/MAX11300PMB1.html MAX11300 evaluation board]. | ||
+ | |||
+ | == Connections == | ||
+ | |||
+ | The MAX11300 I/O ports connections are provided in the following table: | ||
+ | {|class=wikitable style="margin: 0 auto" | ||
+ | |- | ||
+ | ! Port || Signal || dir | ||
+ | |- | ||
+ | | 0 || 3.3 V || in | ||
+ | |- | ||
+ | | 1 || 5 V || in | ||
+ | |- | ||
+ | | 3 || humidity || in | ||
+ | |- | ||
+ | | 5 || temperatire || in | ||
+ | |- | ||
+ | | 7 || pressure || in | ||
+ | |- | ||
+ | | 9 || LED 0 || out | ||
+ | |- | ||
+ | | 11 || LED 1 || out | ||
+ | |- | ||
+ | | 13 || LED 2 || out | ||
+ | |- | ||
+ | | 15 || button 0 || in | ||
+ | |- | ||
+ | | 17 || button 1 || in | ||
+ | |- | ||
+ | | 19 || button 2 || in | ||
+ | |} | ||
+ | The buttons close a circuit to the ground. | ||
+ | The other 9 ports are routed to connector J2. | ||
+ | |||
+ | The digital power supply is 3.3 V. | ||
+ | the analog supply is 5 V. | ||
+ | |||
+ | == Communication == | ||
+ | |||
+ | The basic SPI frame uses 24 bits: | ||
+ | * 7 address bits | ||
+ | * 1 read/write bit | ||
+ | * 16 data bits | ||
+ | |||
+ | The chip supports a burt mode where the basic frame can be enlarged by multiples of 16 bits. | ||
+ | |||
+ | == Configuration == | ||
+ | |||
+ | There is one configuration register for each of the 19 I/O port. | ||
+ | The configuration registers are found at addresses 20<sub>h</sub> to 33<sub>h</sub>. | ||
+ | They are complemented by a DAC value each, at addresses 60<sub>h</sub> to 73<sub>h</sub>. | ||
+ | These DAC values can be used to set the logic levels. | ||
+ | |||
+ | The 4 configuration register MSBs define the functionality of the port. Here some possible values: | ||
+ | * 0 : high impedance | ||
+ | * 1 : Digital input with programmable threshold | ||
+ | * 3 : digital output with DAC-controlled level | ||
+ | * 7: analog input to single-ended ADC | ||
+ | The configuration register LSBs provide parameters. | ||
+ | |||
+ | === ADCs === | ||
+ | |||
+ | ADC ports, registers 20<sub>h</sub>, 21<sub>h</sub>, 23<sub>h</sub>, 25<sub>h</sub> and 27<sub>h</sub>, | ||
+ | are configured with value <code>7100<sub>h</sub></code>. | ||
+ | |||
+ | === Digital outputs === | ||
+ | |||
+ | Digital output ports, registers 29<sub>h</sub>, 2B<sub>h</sub> and 2D<sub>h</sub>, | ||
+ | are configured with value <code>3000<sub>h</sub></code>. | ||
+ | |||
+ | The output level is set by a DAC: for 3.3 V, registers 69<sub>h</sub>, 6B<sub>h</sub> and 6D<sub>h</sub> | ||
+ | are configured with value <code>0547<sub>h</sub></code>. | ||
+ | |||
+ | === Digital inputs === | ||
+ | |||
+ | Digital input ports, registers 2F<sub>h</sub>, 31<sub>h</sub> and 33<sub>h</sub>, | ||
+ | are configured with value <code>1000<sub>h</sub></code>. | ||
+ | |||
+ | The trigger level is set by a DAC: for 1.5 V, registers 6F<sub>h</sub>, 71<sub>h</sub> and 73<sub>h</sub> | ||
+ | are configured with value <code>0999<sub>h</sub></code>. | ||
+ | |||
+ | [[Category:Master]] [[Category:HiRel]] [[Category:CanSat]] |
Latest revision as of 18:01, 3 March 2022
|
Type | CanSat Slave Sensor | Schematic | Description |
---|---|---|---|
V1.0 | 200px|CanSat Slave Sensor V1.0 | CanSat Slave Sensor v1.0 Schematic PDF |
Sensors
The sensors board comprises:
- a HIH-5030-001S humidity sensor
- a TC1046VNBTR temperature sensor
- a MPXH6115A6U pressure sensor
Mixed-Signal I/O
The analog inputs are digitized with the help of a 20-Port Programmable Mixed-Signal I/O MAX11300. The board pinout is compatible with the one of the MAX11300 evaluation board.
Connections
The MAX11300 I/O ports connections are provided in the following table:
Port | Signal | dir |
---|---|---|
0 | 3.3 V | in |
1 | 5 V | in |
3 | humidity | in |
5 | temperatire | in |
7 | pressure | in |
9 | LED 0 | out |
11 | LED 1 | out |
13 | LED 2 | out |
15 | button 0 | in |
17 | button 1 | in |
19 | button 2 | in |
The buttons close a circuit to the ground. The other 9 ports are routed to connector J2.
The digital power supply is 3.3 V. the analog supply is 5 V.
Communication
The basic SPI frame uses 24 bits:
- 7 address bits
- 1 read/write bit
- 16 data bits
The chip supports a burt mode where the basic frame can be enlarged by multiples of 16 bits.
Configuration
There is one configuration register for each of the 19 I/O port. The configuration registers are found at addresses 20h to 33h. They are complemented by a DAC value each, at addresses 60h to 73h. These DAC values can be used to set the logic levels.
The 4 configuration register MSBs define the functionality of the port. Here some possible values:
- 0 : high impedance
- 1 : Digital input with programmable threshold
- 3 : digital output with DAC-controlled level
- 7: analog input to single-ended ADC
The configuration register LSBs provide parameters.
ADCs
ADC ports, registers 20h, 21h, 23h, 25h and 27h,
are configured with value 7100h
.
Digital outputs
Digital output ports, registers 29h, 2Bh and 2Dh,
are configured with value 3000h
.
The output level is set by a DAC: for 3.3 V, registers 69h, 6Bh and 6Dh
are configured with value 0547h
.
Digital inputs
Digital input ports, registers 2Fh, 31h and 33h,
are configured with value 1000h
.
The trigger level is set by a DAC: for 1.5 V, registers 6Fh, 71h and 73h
are configured with value 0999h
.