Support/hardware demonstration
(Difference between revisions)
(→Set-up) |
(→Specification) |
||
Line 44: | Line 44: | ||
The FPGA design can be found in the HEI [https://repos.hevs.ch/svn/eda/VHDL/labs/ELN_support SVN]. | The FPGA design can be found in the HEI [https://repos.hevs.ch/svn/eda/VHDL/labs/ELN_support SVN]. | ||
− | = | + | = Specifications = |
− | + | The operating frequencies are: | |
− | + | * clock : 66 MHz | |
− | The | + | * sampling : 44.1 kHz |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + |
Revision as of 13:40, 17 September 2019
|
The demonstration system plays tones on loudspeakers.
A button allows to define the number of bits the sinewaves are coded on: This allows to talk of binary numbers.
The foreseen outputs are:
- a loudspeaker with a Digital to Analog Converter (DAC) and an analog amplifier
- a loudspeaker with PWM control and a simple class D amplifier.
Set-up
In order to build the demonstration, one needs:
- an FPGA board
- a power supply cable
- a flat band cable
- a HEB board with 4 switches
- an oscilloscope
- an oscilloscope cable
For the DAC solution, one additionally needs:
- a flat band cable
- a HEB DAC board
- a loudspeaker board
- an RJ45 cable
- a power supply adapter for the loudspeaker board
For the PWM solution, one additionally needs:
- a loudspeaker box with the amplifier on the back side
- a C-shaped FPGA board mezzanine
- an additional oscilloscope cable
System
The following system is used to show digital electronic parts to students.
The block diagram is:
The FPGA design can be found in the HEI SVN.
Specifications
The operating frequencies are:
- clock : 66 MHz
- sampling : 44.1 kHz