Cursor/board combination
(Difference between revisions)
(→N23.321) |
(→N23.308) |
||
Line 43: | Line 43: | ||
| 08 || 08 || 51 || 48 || 36 || yes || 1/1 || 1/1 || || ok (15.11.2021) | | 08 || 08 || 51 || 48 || 36 || yes || 1/1 || 1/1 || || ok (15.11.2021) | ||
|- | |- | ||
− | | 09 || 09 || 52 || 49 || 38 || yes || 1/1 || 1/1 || || ok ( | + | | 09 || 09 || 52 || 49 || 38 || yes || 1/1 || 1/1 || || ok (15.11.2021) |
|- | |- | ||
| From here, no more LCD. TBD | | From here, no more LCD. TBD |
Revision as of 18:04, 15 November 2021
|
N23.321
ID | cursor assembly | FPGA Board | Programmer | LCD Board | EEPROM Programmed |
Ribbon cable long/short |
Power cable 12V/5V |
Group Members |
Comment |
---|---|---|---|---|---|---|---|---|---|
01 | 1 | 41 | 41 | 20 | yes | 1/1 | 1/1 | ok (15.11.2021) | |
02 | 2 | 42 | 42 | 22 | yes | 1/1 | 1/1 | ok (15.11.2021) | |
03 | 3 | 43 | 43 | 23 | yes | 1/1 | 1/1 | ok (15.11.2021) | |
04 | 4 | 44 | 44 | 25 | yes | 1/1 | 1/1 | ok (15.11.2021) | |
05 | 5 | 45 | 45 | 28 | yes | 1/1 | 1/1 | ok (15.11.2021) | |
06 | 6 | 46 | 46 | 29 | yes | 1/1 | 1/1 | ok (15.11.2021) |
N23.308
ID | cursor assembly | FPGA Board | Programmer | LCD Board | EEPROM Programmed |
Ribbon cable long/short |
Power cable 12V/5V |
Group Members |
Comment |
---|---|---|---|---|---|---|---|---|---|
07 | 07 | 50 | 47 | 33 | yes | 1/1 | 1/1 | ok (15.11.2021) | |
08 | 08 | 51 | 48 | 36 | yes | 1/1 | 1/1 | ok (15.11.2021) | |
09 | 09 | 52 | 49 | 38 | yes | 1/1 | 1/1 | ok (15.11.2021) | |
From here, no more LCD. TBD | |||||||||
10 | 14 | 54 | 34 | 34 | no | 1/1 | 1/1 | ok (12.11.2018) | |
11 | 15 | 56 | 35 | 35 | no | 1/1 | 1/1 | Cursor not working (verifying encoder signals) | |
12 | 16 | 57 | 36 | 36 | no | 1/1 | 1/1 | Cursor not working (verifying encoder signals) | |
13 | 17 | 58 | 37 | 37 | no | 1/1 | 1/1 | ok (12.11.2018) | |
18 | 18 | 58 | 38 | 38 | no | 1/1 | 1/1 | ok (12.11.2018) | |
19 | 19 | 59 | 39 | 39 | no | 1/1 | 1/1 | ok (12.11.2018) | |
20 | 20 | 60 | 40 | 30 | no | 1/1 | 1/1 | ok (12.11.2018) | |
21 | 21 | 61 | 41 | 24 | no | 1/1 | 1/1 | Error initializing chain (cursor tested with board 50: motor blocks sometimes during ramp) | |
22 | 08 | 62 | 42 | 28 | no | 1/1 | 1/1 | - - | ok (12.11.2018) |
23 | 09 | 63 | 43 | 29 | no | 1/1 | 1/1 | - - | ok (12.11.2018) |
23 | 09 | 64 | 43 | 29 | no | 1/1 | 1/1 | - - | ok (12.11.2018) |
23 | 09 | 65 | 43 | 29 | no | 1/1 | 1/1 | - - | ok (12.11.2018) |
23 | 09 | 66 | 43 | 29 | no | 1/1 | 1/1 | - - | ok (12.11.2018) |
23 | 09 | 67 | 43 | 29 | no | 1/1 | 1/1 | - - | ok (12.11.2018) |
23 | 09 | 68 | 43 | 29 | no | 1/1 | 1/1 | - - | ok (12.11.2018) |