Kart/FPGA board
From FSI
Revision as of 14:11, 2 June 2015 by Francois.corthay (Talk | contribs)
|
The FPGA motherboards are equipped with an AGL125 IGLOO in a VQ100 package.
Connection
They have two I2C connectors on one side and the programming connector on the other side. The I2C connectors allow daisy chaining either with fixed-length PCBs or with flat cables.
The daughterboards connect on the two single row connectors on the long sides. The mounting screws on 3 corners only are used to secure against placing the daughter board the wrong way round.