SEm/escapeLab/safe how-to
From FSI
Revision as of 17:54, 5 May 2022 by Axel.amand (Talk | contribs)
|
Opening the safe
The safe is opened by turning the knob to the first key, pressing the knob, turning the knob to the second key, pressing the knob, and so on. Once all the keys have been entered, the opening wheel has to be turned in order to activate the opening coil.
Only the 5 last entered keys are used to check the opening sequence.
The key values are displayed in binary on the LED array on the safe's front panel.
Test sequence
The test sequence 1 - 2 - 3 - 4 - 5 allows to test the functionality. The safe will not open but a display on the LED array shows that the sequence has been entered properly.