Tools/EclipseArmebs4/SetupWindows/2014-09-05
(Difference between revisions)
(→Setup) |
(→Prerequisites) |
||
Line 12: | Line 12: | ||
== Prerequisites == | == Prerequisites == | ||
− | * Get an ARMEBS4 Suitcase(ask someone from the [[Hardware/ARMEBS/4/Team|ARMBES4 team]] | + | * Get an ARMEBS4 Suitcase (ask someone from the [[Hardware/ARMEBS/4/Team|ARMBES4 team]] |
** Verify it's content: | ** Verify it's content: | ||
*** An ARMEBS4 board | *** An ARMEBS4 board |
Revision as of 12:46, 5 September 2014
|
This document explains how to setup the ARMEBS4 on your computer, the current versions used are:
- Eclipse Luna (4.4)
- gcc-arm-none-eabi - 4_8-2014q2-20140609-win32
- Openocd - 0.8.0
- MSYS - 1.0.11
- make - 3.8.1
- Zadig - 2.1.0
- ARMEBS4 drivers - 1.0.1.0
Prerequisites
- Get an ARMEBS4 Suitcase (ask someone from the ARMBES4 team
- Verify it's content:
- An ARMEBS4 board
- A USB cable (A -> micro B)
- Verify it's content:
- A computer
- With a 64 bit windows (Tested on 7)
- A USB port
- 1GByte free HDD space (on C:)
- You MUST have administrator right to run this setup
- Get the setup file ARMEBS4-WIN64-2014-09-05.zip
Setup
- unzip ARMEBS4-WIN64-XXX.zip to c:\Programs
- You MUST obtain c:\Programs\ARMEBS4\2014-09-05
- Don't use "C:\Program Files\", the space will cause problems
- Feel free to create a shortcut to c:\Programs\ARMEBS4\2014-09-05\start.bat on your desktop.
- Install the Java JDK (c:\Programs\ARMEBS4\2014-09-05\setup\jdk-8u20-windows-x64.exe)
- Follow the steps, there is no special destination requirements
Drivers
- Connect the ARMEBS4 board to the computer using the provided USB cable :
- The Connector is labelled "debug"
- The green PWR led should be lit
- Wait for automatic drivers installation fail
- Open the control panel
- You should see 4 devices with a yellow warning symbol and a ARMEBS4 name
- For each device do (-> 4 times) :
- right-click update driver software... > browse my computer > c:\Programs\ARMEBS4\2014-09-05\tools\drivers > > install this driver anyway
- Now you've got 3 usb serial ports (and don't ask me why there are only 3...)
- For each ARMEBS4 usb serial port do (-> 3 times) :
- right-click update driver software... > browse my computer > c:\Programs\ARMEBS4\2014-09-05\tools\drivers > > install this driver anyway
- run C:\Programs\ARMEBS4\2014-09-05\tools\zadig\zadig.exe
- options > show all
- select armebs4 v01 interface0
- select Winusb
- click on the big button "Replace Driver" or "Reinstall Driver"