Hardware/Interfaces
(Difference between revisions)
(→USB to CAN interface) |
(→USB to CAN interface) |
||
Line 5: | Line 5: | ||
USB TO CAN interface from IXXAT | USB TO CAN interface from IXXAT | ||
+ | The drivers and some tools are available from the constructor :[http://www.ixxat.com/usb-to-can-compact-interface_en.html IXXAT USB-to-CAN Webpage] | ||
=== User DB-9 connector === | === User DB-9 connector === | ||
Revision as of 14:50, 8 February 2013
|
USB to CAN interface
USB TO CAN interface from IXXAT
The drivers and some tools are available from the constructor :IXXAT USB-to-CAN Webpage
User DB-9 connector
Pin Nr. | Signal |
---|---|
1 | - |
2 | CAN-LOW |
3 | GND (both CAN & supply) |
4 | - |
5 | - |
6 | - |
7 | CAN-HIGH |
8 | - |
9 | USB 5V supply |
HEIV modifications
This interface has been modified to have a 5V supply on the DB-9 connector. On this pin, you can draw a current of 300 [mA].
Modifications details
A wire has been added to place the USB voltage on DB-9 pin 9. A 0 ohms resistor has been added to connect the CAN_GND with the supply GND.