No Access
(Difference between revisions)
Line 12: | Line 12: | ||
''Arduino IDE version : 1.5.3'' | ''Arduino IDE version : 1.5.3'' | ||
''Target version :'' | ''Target version :'' | ||
− | <p>When programming the target, it can happen many errors | + | <p>When programming the target, it can happen many errors :</p> |
<h4>[...] Retry 0: Got TIMEOUT </h4> | <h4>[...] Retry 0: Got TIMEOUT </h4> | ||
− | <h4> | + | <h4>/dev/ttySxx: Permission denied</h4> |
+ | <p>Check if an another software is using the selected port COM and close it. If it doesn't work, use an another port COM on computer or reboot Windows.</p> | ||
<h4>/dev/ttySxx: No such file or directory </h4> | <h4>/dev/ttySxx: No such file or directory </h4> | ||
− | <p>The port is dead for this session : use an another | + | <p>The port is dead for this session : use an another port COM on computer or reboot Windows.</p> |
<h4>Unrecognized device (on "Devices and Printer")</h4> | <h4>Unrecognized device (on "Devices and Printer")</h4> | ||
<p>Remove the USB cable from the board and reboot it by removing the power supply. Verify that After a long time, the normally </p> | <p>Remove the USB cable from the board and reboot it by removing the power supply. Verify that After a long time, the normally </p> |
Revision as of 09:04, 1 April 2014
Access to this page is denied for you!
If you want to access this page you can:
|
Contents |
Bugs on transfer
OS : Windows 7 Arduino IDE version : 1.5.3 Target version :
When programming the target, it can happen many errors :
[...] Retry 0: Got TIMEOUT
/dev/ttySxx: Permission denied
Check if an another software is using the selected port COM and close it. If it doesn't work, use an another port COM on computer or reboot Windows.
/dev/ttySxx: No such file or directory
The port is dead for this session : use an another port COM on computer or reboot Windows.
Unrecognized device (on "Devices and Printer")
Remove the USB cable from the board and reboot it by removing the power supply. Verify that After a long time, the normally