Tools/EclipseArmebs4/SetupWindows/2014-09-05
(Difference between revisions)
(Created page with "{{public}} {{TOC right}}") |
|||
Line 1: | Line 1: | ||
{{public}} | {{public}} | ||
{{TOC right}} | {{TOC right}} | ||
+ | |||
+ | This document explains how to setup the ARMEBS4 on your computer, the current versions used are: | ||
+ | * Eclipse Luna (4.4) | ||
+ | * gcc-arm-none-eabi - 4_8-2014q2-20140609-win32 | ||
+ | * Openocd - 0.8.0 | ||
+ | * make - 3.8.1 | ||
+ | * Zadig - 2.1.0 | ||
+ | * ARMEBS4 drivers - armebs4-driver-1.0.1.0 | ||
+ | |||
+ | == Prerequisites == | ||
+ | * Get an ARMEBS4 Suitcase(ask someone from the [[Hardware/ARMEBS/4/Team|ARMBES4 team]] | ||
+ | ** Verify it's content: | ||
+ | *** An ARMEBS4 board | ||
+ | *** A USB cable (A -> micro B) | ||
+ | *** FIXME : A DVD/USB stick | ||
+ | * A computer | ||
+ | ** With a 64 bit windows (Tested on 7) | ||
+ | ** A USB port | ||
+ | ** 1GByte free HDD space (on C:) | ||
+ | ** You MUST have administrator right to run this setup | ||
+ | |||
+ | == Setup == | ||
+ | * Install the Java JDK (SW_SOURCE/setup/jdk-8u20-windows-x64.exe) | ||
+ | ** Follow the steps, there is no special destination requirements | ||
+ | * |
Revision as of 09:00, 5 September 2014
|
This document explains how to setup the ARMEBS4 on your computer, the current versions used are:
- Eclipse Luna (4.4)
- gcc-arm-none-eabi - 4_8-2014q2-20140609-win32
- Openocd - 0.8.0
- make - 3.8.1
- Zadig - 2.1.0
- ARMEBS4 drivers - armebs4-driver-1.0.1.0
Prerequisites
- Get an ARMEBS4 Suitcase(ask someone from the ARMBES4 team
- Verify it's content:
- An ARMEBS4 board
- A USB cable (A -> micro B)
- FIXME : A DVD/USB stick
- Verify it's content:
- A computer
- With a 64 bit windows (Tested on 7)
- A USB port
- 1GByte free HDD space (on C:)
- You MUST have administrator right to run this setup
Setup
- Install the Java JDK (SW_SOURCE/setup/jdk-8u20-windows-x64.exe)
- Follow the steps, there is no special destination requirements