Main Page
From UIT
Welcome to the HES-SO Valais Wallis Wiki of the Infotronics Unit
|
Get informed about all changes to this wiki by signing up to this RSS feed
Getting started
Use the Navigation to the left to enter the different sections or follow any of the following links:
News
- System Generator for DSP updates
- HLS imporvements
- further Device Support for Virtex-7, Artix-7 and Zynq-7000
Xilinx ISE 14.4 and Xilinx Vivado Design Suite 2012.4 introducing the Vivado WebPACK Tool have been released
{{{3}}}
- Performance and GUI improvements
- further VHDL-2008 support and inclusion of VHLD-2008 OSVVM librarires
- new SystemVerilog 1800-2012 support
Model-/QuestaSim 10.2 has been released
{{{3}}}
- Faster GUI with QML and QtQuick with special focus on low cost HW environments (mobile, embedded).
- Built-in OpenGL (ES) support
- Webkit and HTML5
- Easy porting from Qt
After 7 years of development, Qt 5.0, centered around Qt Quick with the full capabilities of OpenGL/OpenGL ES, has been released.
{{{3}}}
- 5K - 120K LUTs, 190k - 4.5Mbit RAM, 11 -240 Math (DSP) blocks
- 166 MHz ARM® Cortex™-M3 microprocessor with 8Kbyte Instruction Cache
- connects to USB 2.0 HS OTG, CAN, SPI, I2C and Gigabit Ethernet
- static power 10mW during operation on the 50K LUT device
- 0 - 16 5Gbps SERDES, PCIe, XAUI / XGXS+ Native SERDES
- Hard 800 mbps DDR2/3 controllers with SECDED (aka ECC or EDAC) protection
- but no more DAC/ADC
- samples available now, first production silicon slated for early 2013
Microsemi revealed the new SmartFusion®2 SoC
{{{3}}}
- Xilinx Vivado PAR support
- new Timing Report View
- compiler enhancements (SV, VHDL2008, ...)
Synplify 2012.9 is now available on guo's Software Server
{{{3}}}
- several bugfixes
- new license format
HDL-Designer 2012.1 has been released
{{{3}}}
This bugfix release is available for download now.
UVM 1.1b
{{{3}}}