Hardware/CubeSat Gumstix/camera connector
From UIT
Revision as of 14:34, 29 October 2015 by Francois.corthay (Talk | contribs)
|
Connector
The connector layout is:
connector pin |
signal | FPGA pin |
function |
---|---|---|---|
1 | 3.3 V | power supply | |
2 | GND | ||
3 | TxD / SCLK | A4 | RS232 / I2C control |
4 | RxD / SDA | B10 | |
5 | Frame valid / VSync | A5 | frame control |
6 | Line valid / HRef | C5 | |
7 | Data valid | B6 | |
8 | Pixel clock | A10 | |
9 | D0 | A6 | frame data |
10 | D1 | D6 | |
11 | D2 | A7 | |
12 | D3 | C6 | |
13 | D4 | B8 | |
14 | D5 | C7 | |
15 | D6 | A8 | |
16 | D7 | D8 | |
17 | D8 | A9 | |
18 | D9 | C8 | |
19 | D10 | A13 | |
20 | D11 | C9 | |
21 | CC1 / ExtSync | A14 | camera control |
22 | CC2 / XCLK | C14 | |
23 | CC3 / Reset | B14 | |
24 | CC4 / PowerDn | D14 |
Camera modules
The connector is meant for use with different camera modules.
OV7670
The OV7670 camera module has:
Photonfocus
Foreseen: OEM-D1024E-160-LC, RS232 control