Hardware/8CH4IOHFAnalogMuxBoard
From UIT
Revision as of 11:31, 24 August 2016 by Alexandr.ganchinh (Talk | contribs)
|
This board was created for high quality analog muxing/demuxing for demanding measurement applications. <PICTURE MISSING>
Characteristics
- 256x100mm 8 layers PCB
- 8 <-> 1 channels
- 4 I/O per channels (ground commuted with the signal, so no common ground)
- SMA or SMB connectors
- HF signal relay based solution
- Balanced tree routage (same trace distance for any commuted channel)
- 50Ohms impedance controlled shielded coaxial traces
- 1xLED per channel (light when selected) + 1x power LED.
- 1x 2mm-pitched 2x6 connector.
Some plots : <PICTURES MISSING>
Power supply / driving considerations
This board doesn't have any driving circuit on it. The following signals can be found on the connector :