Tools/Eclipse4STM32
From UIT
|
Toolchain
The toolchain we use comes from https://launchpad.net/gcc-arm-embedded. This is a toolchain maintained by ARM employees and is available for Linux, Windows and OS X.
Linux (Ubuntu based)
There is a PPA for gcc-arm-embedded.
sudo add-apt-repository ppa:terry.guo/gcc-arm-embedded sudo apt-get update sudo apt-get install build-essential gcc-arm-none-eabi
Linux (generic)
- Download gcc-arm-none-eabi-4_7-2013q2-20130614-linux.tar.bz2
- Uncompress into /opt (arm-none-eabi-ld should be in /opt/xdev/gcc-arm-none-eabi-4_7-2013q2/bin/)
Windows
- download gcc-arm-none-eabi-4_7-2013q2-20130614-win32.zip
- unzip in C:\xdev\tools\gcc-arm\4.7_2013q2 (arm-none-eabi-gcc.exe should be in C:\xdev\tools\gcc-arm\4.7_2013q2\bin)
- download gnuwin-make-3.81.zip
- unzip in c:\xdev\tools\gnuwin\make\3.81 (make.exe should be in c:\xdev\tools\gnuwin\make\3.81\bin)
- add make.exe to your PATH.
openocd
Linux
- install openocd (should be in the repository of your favorite distribution)
- create the file /etc/udev/rules.d/10-jtag.rules whith the following content:
# STM32f407 discovery (stlink and DFU mode) ATTRS{idProduct}=="cff8", ATTRS{idVendor}=="0403", MODE="666", GROUP="plugdev" ATTRS{idProduct}=="3748", ATTRS{idVendor}=="0483", MODE="666", GROUP="plugdev" # Amontec JTAGkey 2 ATTRS{idProduct}=="df11", ATTRS{idVendor}=="0483", MODE="666", GROUP="plugdev"
- make sure you're in the plugdev group
Windows
- Download and install openocd-0.7.0
- Unzip into c:\xdev\tools\openocd\0.7 (openocd-0.7.0.exe should be in C:\xdev\tools\openocd\0.7.0\bin)
- rename openocd-0.7.0.exe into openocd.exe
- For the stm32f4 discovery board (st-link) : Download and install this driver File:Libusb-win32 stlink driver-120229.zip
- For the other boards FIXME
Eclipse
Tested with eclipse 4.3 (Kepler), but at least works with Juno (4.2) and Indigo (4.1)
- Help -> Install new software ... -> work with "-- All available sites --" and add at least :
* Programming Languages : C/C++ development Tools * Mobile and Device Development : C/C++ Hardware Debugging * Mobile and Device Development : C/C++ Cross compiler support * Subversive SVN Team provider + subversive connector
- After setup and restart, subversive should ask to choose a connector, choose:
* SVNkit 1.7.9
Project Setup
In the project properties make sure
* C/C++ build > settings -> Settings tab : "Cross settings" : * prefix : "arm-none-eabi-" * path (windows) : "C:\xdev\tools\gcc-arm\4.7_2013q2\bin" * path (Linux generic) : "/opt/xdev/gcc-arm-none-eabi-4_7-2013q2/bin/" * path (Unbutu based) : arm-none-eabi- tools are in the PATH. * C/C++ build > settings -> Settings tab : "Cross GCC compiler" : * Symbols : * STM32F4XX=1 * ARM_MATH_CM4=1 * __FPU_PRESENT=1 * USE_STM324xG_EVAL=1 * Includes : * "${workspace_loc:/${ProjName}/libheivs_stm32/include}" * "${workspace_loc:/${ProjName}}" * Debugging: * Maximum -g3 * Warnings: * -Wall * Miscellaneous * "-c -fmessage-length=0 -mthumb -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16" * C/C++ build > settings -> Settings tab : "Cross GCC linker" : * General : * No shared libraries (-static) * Libraries * m * Miscellaneous * Linker flags : "-T "${workspace_loc:/${ProjName}/libheivs_stm32/stm32f407ig_flash.ld}" -mthumb -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16" * Other options (-Xlinker [option]) * -Map=linker.map * --gc-sections * C/C++ build > settings -> Settings tab : "Cross GCC assembler" : * General: * Assembler flags : "-mthumb -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -g3"
Debug settings
- Debug configuration -> GDB Hardware debugging
* At the bottom of the page, make sure the project uses "Standard Hardware Debugging Laucher" (DSF won't work). * Debugger tab * GDB command (Ubuntu based) : "arm-none-eabi-gdb" * GDB command (Linux generic) : "/opt/xdev/gcc-arm-none-eabi-4_7-2013q2/bin/arm-none-eabi-gdb" * GDB command (Windows) : "C:\xdev\tools\gcc-arm\4.7_2013q2\bin\arm-none-eabi-gdb.exe" * Use remote target : checked * JTAG Device (via pipe) * GDB Connection string (stlink): "| openocd -f interface/stlink-v2.cfg -f target/stm32f4x_stlink.cfg -c "gdb_port pipe"" * GDB Connection string (jtagkey2): "| openocd -f interface/jtagkey2.cfg -f board/stm3241g_eval.cfg -c "gdb_port pipe"" * Startup tab * Reset and delay : 1 * halt monitor flash erase_sector 0 0 0 monitor reset halt * Load image (use project binary) * Load symbols (use project binary) * Set breakpoint at main * Run commands monitor reset halt continue * Common tab Save as shared file, so the debugging parameters will be saved into the project.