Hardware/PICEBS/2
From UIT
Revision as of 15:01, 2 June 2015 by Pascal.sartoret (Talk | contribs)
|
ARMEBS4
The PICEBS2is a CPU board based on the PIC18F87K22 micro-controller. Unless otherwise noted, this document is also valid for all other board based on this micro-controller.
Datasheets
FIXME : complete this table
Description | Chip type | Details | Designator | Datasheet |
Board | PICEBS2 v1.2 | Schematics (pdf), pcb (pcad pcb) | ||
Micro-controller | ST STM32F417IGH | Cortex-M4 with floating point, 1MB flash, 128+64KB RAM, USB, Ethernet, ... | U3 |
stm32f4 family : Peripheral register description, ... stm32f417 : Peripheral list, pinning, memory map, ... |
Cortex-M4F | inside U3 | Cortex-M4 Technical reference manual ARMv7M Architecture Reference Manual | ||
Ram | ISSI IS66WVE4M16BLL-70BLI | 8 MBytes PSRAM | U4 | datasheet |
Display | ST STM32F4-DIS | 320x240 TFT with touchscreen | x | schematics lcd controller touch screen controller |
EEPROM | Microchip 24LC64 | 64kbit i2c EEPROM | U5 | datasheet |
Accelerometer | Freescale MMA7660FC | i2c digital accelerometer | U8 | datasheet |
Ethernet transceiver | Microchip (SMSC) LAN8720A | 10/100 MBit/s Ethernet transceiver | U10 | datasheet |
Audio codec | Maxim MAX98090ETL | I2S audio codec | U11 | datasheet |
USB interface | FTDI FT4232HQ | Quad USB to Multipurpose interface | U14 | datasheet |
Gyroscope | ST L3GD20 | i2c/SPI MEMS 3-axis digital gyroscope | U23 | datasheet |
Development environment
The development environment is composed of :
- Eclipse (IDE)
- gcc (compiling, linking, ...)
- openocd (programming/debugging)
It is available free of charge, and has been extensively tested under Linux and windows
Setup
The setup has his own page : setup.
Troubleshooting
The Troubleshooting has his own page : Troubleshooting