HiRel/CanSat/InterConnect
From FSI
(Difference between revisions)
Line 1: | Line 1: | ||
{{TOC right}} | {{TOC right}} | ||
− | The interconnect boards hold the other boards on the top and the bottom sides. | + | The [[HiRel/CanSat]] interconnect boards hold the other boards on the top and the bottom sides. |
{|class=wikitable | {|class=wikitable |
Latest revision as of 14:38, 7 January 2016
|
The HiRel/CanSat interconnect boards hold the other boards on the top and the bottom sides.
Type | CanSat Interconnect | Schematic | Description |
---|---|---|---|
V1.0 | CanSat Interconnect v1.0 Schematic PDF |
Interconnect
The FPGA board connects to every other board, as shown below:
The bottom interconnect board provides the 3.3 V power supply. The top board provides the 5 V. Both interconnect boards provide 4 lines from the FPGA board to each slave boards.
On the interconnect board, both rows of the 12-pin slave connectors carry the same signals. 6-pin connectors could have been used, but the 12-pin connectors provide a better mechanical stability.