Hardware/FPGARack
(31 intermediate revisions by 6 users not shown) | |||
Line 1: | Line 1: | ||
− | |||
{{TOC right}} | {{TOC right}} | ||
+ | The basic idea behind this board is to have a development FPGA board, with a choice of big FPGA's and a VME compatible 2U Rack connector. The [[Hardware/Stock_FPGA-Rack|stock]] can be verified and updated on-line. | ||
− | + | {|class=wikitable | |
+ | |- | ||
+ | ! Type || FPGA Rack || Schematic || UCF || Description | ||
+ | |- | ||
+ | | V1.0 || [[File:FPGA_Rack_v1_0.jpg|200px|FPGA Rack V1.0]] || [[Media:FPGARack_v1_0_schematics.pdf|FPGA-Rack v1.0 Schematic PDF]] || [[Media:FPGARack_v1_0.ucf|FPGA-Rack v1.0 UCF Files]] || There are different FPGA mounted: Spartan 6 XC6SLX45, Spartan 6 XC6SLX100, Spartan 6 XC6SLX150 | ||
+ | |- | ||
+ | |} | ||
− | + | The boards are compatible with the [[Hardware/FPGARackBackplane|FPGA Rack Backplane]] for interconnecting different boards with the help of the [[Standards/HEI_'VME'_Backplane_Bus|HES-SO Backplane Bus]] and the [[Components/IP/VME|HES-SO VME IP Core]]. | |
− | + | A VHDL test code with the default UCF Files can be found at the EDA SVN Repository: | |
− | + | * https://repos.hevs.ch/svn/eda/VHDL/fgpa_rack | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | * | + | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | = | + | = Limitation = |
− | + | There are Boards with 3 types of FPGA's on it; ''XC6SLX45'', ''XC6SLX100'' and ''XC6SLX150''. | |
− | + | {{WarningBox|content=Mezzanine Pin <code>T8</code> - <code>MEZ_PB19</code> can't be used if a ''XC6SLX100'' is mounted.}} | |
− | + | ||
− | + | ||
− | + | ||
− | = | + | = Leds and Buttons = |
− | + | There are 4 Dil switches and 4 Leds mounted on the FPGARack board. They are not properly indicated 0 - 3 therefore see the image below. | |
− | + | ||
− | [[ | + | [[File:FPGA_Rack_v1_0_LedsButtons.jpg|200px|FPGA Rack V1.0 Leds and Buttons]] |
+ | |||
+ | = Features = | ||
+ | * 2 Port Ethernet (one PTP physical) | ||
+ | * USB FTDI | ||
+ | * 2 UART | ||
+ | * Flash 128Mb - 512Mb | ||
+ | * Ram 128Mb - 256Mb | ||
+ | * Spartan 6 LX45 - LX100 - LX150 | ||
+ | * 4 Leds | ||
+ | * 4 Dil Switches | ||
+ | * 1 Button | ||
+ | * 106.25MHz Main Clock | ||
+ | * VME compatible connector 3x32Pin | ||
+ | * 2 Debug connectors 2x50Pin | ||
+ | * 2 Mezzanine Connector ARM-EBS and FPGA-EBS compatible | ||
+ | * Powered by USB or VME Power | ||
+ | |||
+ | = VME connector logic levels = | ||
+ | The I/O bank which interfaces the VME connector | ||
+ | (and the little black connectors) | ||
+ | can be powered with 3.3V or with 2.5V. | ||
+ | A zero-Ohm resistor has to be soldered at the proper place near the FPGA. | ||
+ | |||
+ | = Programmation = | ||
+ | This board can be programmed in 2 ways, | ||
+ | * first the FPGA can be directly programmed | ||
+ | * second the FPGA can be programmed via the onboard Flash memory | ||
+ | |||
+ | For more explanation see at the Howto below: | ||
+ | * [[Hardware/FPGARack/Programmation|FPGA Rack Programmation]] | ||
+ | |||
+ | = Links = | ||
+ | * [http://www.xilinx.com/support/documentation/spartan-6.htm Xilinx Spartan 6 Documents] | ||
+ | * [[Standards/VME|VME Description]] | ||
+ | |||
+ | [[File:fpga_rack_system.png|FPGA Rack System]] | ||
+ | |||
+ | [[Category:Hardware]] [[Category:FPGARack]] |
Latest revision as of 14:08, 5 April 2017
|
The basic idea behind this board is to have a development FPGA board, with a choice of big FPGA's and a VME compatible 2U Rack connector. The stock can be verified and updated on-line.
Type | FPGA Rack | Schematic | UCF | Description |
---|---|---|---|---|
V1.0 | ![]() |
FPGA-Rack v1.0 Schematic PDF | FPGA-Rack v1.0 UCF Files | There are different FPGA mounted: Spartan 6 XC6SLX45, Spartan 6 XC6SLX100, Spartan 6 XC6SLX150 |
The boards are compatible with the FPGA Rack Backplane for interconnecting different boards with the help of the HES-SO Backplane Bus and the HES-SO VME IP Core.
A VHDL test code with the default UCF Files can be found at the EDA SVN Repository:
Limitation
There are Boards with 3 types of FPGA's on it; XC6SLX45, XC6SLX100 and XC6SLX150.
Leds and Buttons
There are 4 Dil switches and 4 Leds mounted on the FPGARack board. They are not properly indicated 0 - 3 therefore see the image below.
Features
- 2 Port Ethernet (one PTP physical)
- USB FTDI
- 2 UART
- Flash 128Mb - 512Mb
- Ram 128Mb - 256Mb
- Spartan 6 LX45 - LX100 - LX150
- 4 Leds
- 4 Dil Switches
- 1 Button
- 106.25MHz Main Clock
- VME compatible connector 3x32Pin
- 2 Debug connectors 2x50Pin
- 2 Mezzanine Connector ARM-EBS and FPGA-EBS compatible
- Powered by USB or VME Power
VME connector logic levels
The I/O bank which interfaces the VME connector (and the little black connectors) can be powered with 3.3V or with 2.5V. A zero-Ohm resistor has to be soldered at the proper place near the FPGA.
Programmation
This board can be programmed in 2 ways,
- first the FPGA can be directly programmed
- second the FPGA can be programmed via the onboard Flash memory
For more explanation see at the Howto below: