Hardware
From UIT
Revision as of 11:12, 6 September 2022 by Francois.corthay (Talk | contribs)
|
Here your can find various information about the Hardware used at HES-SO Valais Wallis
Stock
If you need some Hardware parts, ask François Corthay, Clausen Michael or Sartoretti Pascal and check the Inventory
PCB Design
Check out our Design Rules and our Altium Designer Manual.
Ordering
If you need to order some material, check the Hardware Ordering Guide.
Documentation
Information about EDA Hardware can be found here: I:\Admin\SI-ET\Institut\Infrastructure\Labos\A309\FPGA\
FPGA Boards
FPGA EBS
FPGA Rack
- HES-SO FPGA Rack Board - XC6SLX45/100/150
- HES-SO FPGA Rack Zynq AD/DA (ZynqADDA) - XC7Z020
- HES-SO FPGA Rack 4ethernet - XC6SLX45/100/150
- HES-SO FPGA Rack Edison - AGL1000
FPGA Poetic
- Industrial Electronics & Drives Poetic FPGA Board - XC6SLX45/100/150
CubeSat
- CubeSat + Gumstix - processing board
- CubeSat + Raspberry Pi zero - On-Board Computer (OBC)
CanSat
- CanSat Master FPGA - Spartan 6 XC6SLX9 and 8Mb M25P80 SPI PROM
DevKits
- Enterpoint Drigmorn4 Spartan6 starter kit
- Actel CoreMP7 Dev-Kit
- Actel SmartFusion Dev-Kit
- Beckhoff EtherCAT FB1130
- Trenz Electronic Zynq Module TE0720
MiniBioDet
- MiniBioDet FPGA Board - 20/40/65/80 MSPS 16bit ADC / 175 MSPS 14bit DAC / Bluetooth Smart
Processor Boards
CPU Boards
- HES-SO STM32F7 Board with extension
- HES-SO ARMEBS Board
- Raspberry Pi ARM11 Single Board Computer
- TQM28a ARM9 module with i.MX28 from Freescale
- Intel Galileo Arduino board
- PC Engines APU1D4
- Gumstix
- Raspberry Pi 3 - cours FET
Pic Boards
Signal Boards
Rack Boards
Backplanes
Slave
- HEI Rack Debug Board
- HEI Rack HEB Backplane
- HEI Rack AD/DA (OLGMADDA) - [Deprecated]
- HEI Rack Zynq AD/DA (ZynqADDA)
- HEI Rack Hi-Speed AD/DA (HiSADDA)
- HEI Rack Relay Ctrl
- HEI Rack RF
Mezzanine Boards
- EBS Mezza Parallel I/O and Ethernet tap
- EBS Mezza 8-channel ADC
- EBS Mezza high-speed AD-DA - [Deprecated]
- EBS Mezza audio AD-DA
- EBS Mezza PWM
- EBS Mezza 20 ADCs, 8 DACs
Extension Boards
Parallelport Boards
Boards with a Paralellport connector compatible with the FPGA EBS board.
General purpose
- LCD (with 4 buttons and 8 LEDs)
- 4 rotary switches
- Audio ADC DAC
- 2-channel DAC
- 7 x 10 LED matrix
- JTAG and RS232
- RS232
Related to a laboratory project
- EBS Motor for clock and cursor ElN-SI project
- EBS Synchro for mains synchronization ElN-ETE project
- EBS Inverter for inverter ElN-ETE project
- EBS Beeper and microphone for Morse SEm project